RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1509 views Post Reply
03-01-2012 02:34 AM  9 years ago
NLDIRENZO

rrApprentice

New York

MyPosts All Forum Topic
Sometimes i feel like you need a PHD to fly helicopters lolDid you mean to do that? Yeah its called a crash landing its a new trick
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 03:53 AM  9 years ago
VKGT

rrElite Veteran

Sanford, NC

MyPosts All Forum Topic
lol no doubt! I've been flying helis off and on since 2000 and I still have a lot to learn!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 04:51 AM  9 years ago
NLDIRENZO

rrApprentice

New York

MyPosts All Forum Topic
Ok new questions i'm building a 450 on the bottom bearing block I inserted the bearing but when I put in the main shaft it falls out... but it came upside down like that did they put it in the wrong way?Did you mean to do that? Yeah its called a crash landing its a new trick
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 04:53 AM  9 years ago
Dood

rrProfessor

Wescanson

MyPosts All Forum Topic
If the bearing is that loose in the bearing block you want to secure it with some green loctite. Or send it back and ask for a replacement bearing block.
No bearing should ever fit that loose,
  ▲
▲ ▲
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 04:56 AM  9 years ago
NLDIRENZO

rrApprentice

New York

MyPosts All Forum Topic
so its supposed to be upside down like that?Did you mean to do that? Yeah its called a crash landing its a new trick
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 04:56 AM  9 years ago
NLDIRENZO

rrApprentice

New York

MyPosts All Forum Topic
and if i use loctite won't it stop the movement of the bearing?Did you mean to do that? Yeah its called a crash landing its a new trick
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 04:57 AM  9 years ago
Dood

rrProfessor

Wescanson

MyPosts All Forum Topic
Don't know. Never built one. Do it like they tell you to in the manual. I just know that no bearing should ever be that loose in the bearing block.  ▲
▲ ▲
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 05:00 AM  9 years ago
NLDIRENZO

rrApprentice

New York

MyPosts All Forum Topic
ok sir thanks!Did you mean to do that? Yeah its called a crash landing its a new trick
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 11:31 AM  9 years ago
fastflyer20

rrKey Veteran

N. Tonawanda, NY

MyPosts All Forum Topic
Yes it should push out in the down direction for the lower bearing block. Yes loctite on aluminum bearing blocks is the way to go. I prefer blue, it is plenty strong enough to secure a main shaft bearing, then they come out and clean up easier when being replaced. Clean mating surfaces with alcohol or acetone and wipe dry. Apply carefully to the outside of the bearing and wipe away excess after assembly.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 06:48 PM  9 years ago
NLDIRENZO

rrApprentice

New York

MyPosts All Forum Topic
ok thanks for all the infoDid you mean to do that? Yeah its called a crash landing its a new trick
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 11:52 PM  9 years ago
NLDIRENZO

rrApprentice

New York

MyPosts All Forum Topic
ONE WAY BEARING!!!! AHHHH

SO THIS BEARING THING IS GONNA BE THE DEATH OF ME

i got the main block bearings under control now on to the one way bearing i have one set from align already put together and the tail gear does what its supposed to do and doesn't spin backwards... but on my other one i was swapping out the main gear from the 500 and for some reason my tail gear is spinning like a loose goose. and i looked at some videos but no such help

ANY TAKERS WANNA SCHOOL ME AGAIN ON HOW I"M A RETARD???
Did you mean to do that? Yeah its called a crash landing its a new trick
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-02-2012 03:43 AM  9 years ago
fastflyer20

rrKey Veteran

N. Tonawanda, NY

MyPosts All Forum Topic
OWB letters face down
Locktite into housing
Clean out all grease
Lube rollers with a few drops of ATF - automatic transmission fluid.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-03-2012 06:52 PM  9 years ago
NLDIRENZO

rrApprentice

New York

MyPosts All Forum Topic
what happens if the tail gear spins? will it flyDid you mean to do that? Yeah its called a crash landing its a new trick
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1509 views Post Reply
Print TOPIC

 5  Topic Subscribe

Wednesday, July 28 - 5:30 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online