RunRyder RC
WATCH
 302 pages [ <<    <     68      69     ( 70 )     71      72     NEXT    >> ] 253871 views POST REPLY
Home✈️Aircraft🚁Helicopter🌐Clubs and Associations › *Official Eagles Associates RC Heli Club, Kansas City*
05-09-2013 03:06 AM  6 years ago
Retired2011

rrElite Veteran

Lee's Summit, MO

MyPosts All Forum Topic
You talkin' resetting modems or chicks, Micah?

I wondered how long it would be before you said something,Dennis
Chet
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-09-2013 06:18 PM  6 years ago
mhills51

rrKey Veteran

Raytown, MO.

MyPosts All Forum Topic
Replaced the tail bearings on my 130 with KDEdirect and now no play in the tail shaft. I also replaced the tail slider with the extreme one and now the tail blades have no play. So when I take it up next it will crash lol!Have fun while it last!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-09-2013 07:38 PM  6 years ago
Pascal-KC

rrKey Veteran

Kansas City, KS, USA

MyPosts All Forum Topic
This little 130X is mechanically temperamental, but when it works, it works great... I had to replace the gear driving the tail (on the tail side) for the second time as it ended up not spinning with the shaft. This leads to no tail authority which leads to crash...Team Mikado, Team Revolectrix, KBDD Team Pilot
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-09-2013 10:42 PM  6 years ago
D.Magee

rrKey Veteran

kansas city mo.

MyPosts All Forum Topic
What time is the club meating Saturday I plan on trying to be there.

let's pretend it's another open house. It was so mutch fun we can do it again.

old hippie Do you have a laptop and did you down load the soft ware for the vbar? If you need any help just call.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-09-2013 10:47 PM  6 years ago
D.Magee

rrKey Veteran

kansas city mo.

MyPosts All Forum Topic
http://helifreak.com/showthread.php?t=194297

old hippie Here are some great videos on the vbar.
A must watch.Start with episode 4 seting up a new heli.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-10-2013 01:05 AM  6 years ago
Splinterheart

rrVeteran

Gladstone, MO.

MyPosts All Forum Topic
Meeting time & place
The meeting on Saturday will be at the usual time, which is 10:00am. We will have it at Minor Park, and now that it's finally getting warm enough, we can switch over to our summer mode and have all meetings at Minor Park. ( weather permitting).

It turns out that I was wrong about my cable modem. The cable guy didn't show up last night, but when I called them,I found out that my appointment isn't until Sunday afternoon! Long story short,I went to the TWC store this evening and swapped out my modem, but it still isn't getting a connection!!

So, no internet for most of the weekend, and I don't even know if it will get fixed on Sunday since I have no use why the line is down.

You guys remember how pissed off I was when my cat chewed through my tail servo wire? Not having internet makes me even more angry....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-10-2013 02:39 AM  6 years ago
Retired2011

rrElite Veteran

Lee's Summit, MO

MyPosts All Forum Topic
That sucks...not sure how I would deal with no internet

D.Magee, the closest I could find is a Logo 500 so I'm using and abusing it right now.
Chet
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-10-2013 02:45 AM  6 years ago
D.Magee

rrKey Veteran

kansas city mo.

MyPosts All Forum Topic
Glad you found it keeping abusing it an get it out of your system be for Saturday.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-10-2013 02:49 AM  6 years ago
D.Magee

rrKey Veteran

kansas city mo.

MyPosts All Forum Topic
Splinterheart
you could always hook up to the phone and go back to dial up. LOL
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-10-2013 04:08 AM  6 years ago
mhills51

rrKey Veteran

Raytown, MO.

MyPosts All Forum Topic
Won't be at our meeting. Not only do I have to do overtime Saturday, but I have to do it with my two boys in tow.Have fun while it last!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-10-2013 11:34 AM  6 years ago
Retired2011

rrElite Veteran

Lee's Summit, MO

MyPosts All Forum Topic
Someday (when you are an old fart like me) you'll cherish those days you had to bond with your boys

We'll miss you Sat...
Chet
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-10-2013 10:53 PM  6 years ago
mhills51

rrKey Veteran

Raytown, MO.

MyPosts All Forum Topic
It will be over by 2 so you bet I will be stopping by the field.Have fun while it last!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-11-2013 12:46 AM  6 years ago
mhills51

rrKey Veteran

Raytown, MO.

MyPosts All Forum Topic
This Vbar light is getting real close to going on my 500pro. I tested my pitch on the 450 and I was so far off it should not of flown. The vibrations were around 515. I got the new align digital pitch gauge. I have the HK turnigy 3D pro FBL controller coming. I is expose to be a HB800 beast clone. As soon as it arrives I will put the V light on the 500.Have fun while it last!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-11-2013 04:09 AM  6 years ago
D.Magee

rrKey Veteran

kansas city mo.

MyPosts All Forum Topic
I don't have a push mower but If someone can bring one to the field tomorrow. I would mow a small place to make it better
for hover pratice and autos at the north end of the field. So we dont have to do them on the pad.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-11-2013 04:44 AM  6 years ago
Dennis Carey

rrVeteran

Kansas City

MyPosts All Forum Topic
Autos?Team Mikado USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-11-2013 12:11 PM  6 years ago
Retired2011

rrElite Veteran

Lee's Summit, MO

MyPosts All Forum Topic
I could bring a mower,
but I'd have to leave the chopper at home
Chet
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-12-2013 10:00 PM  6 years ago
Splinterheart

rrVeteran

Gladstone, MO.

MyPosts All Forum Topic
Back online!
My connection to the outside digital world has been restored! It turned out that the problem was in the main junction box for my apartment complex. Apparently, the last TWC guy to work in there accidentally got my cable caught in the door hinge of the junction box, crushing (and severing) it when he closed the door. Doh!

But, it's fixed now! w00t!

~=S=~
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-12-2013 11:16 PM  6 years ago
mhills51

rrKey Veteran

Raytown, MO.

MyPosts All Forum Topic
Raymond your Heli is ready! For $10 I will let you keep the canopy lol!

Have fun while it last!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2013 02:51 AM  6 years ago
Pascal-KC

rrKey Veteran

Kansas City, KS, USA

MyPosts All Forum Topic
Pretty good afternoon of flying today. Mike, Dennis and Chet were there. Unfortunately, I hit the blades of my TRex 450 on the last landing of the day: a few parts need replacement including the main blades. Something to keep me busy in my workshop this week...

I hope you all had a great Mother's day and I wish you a good week.

BTW, Darren: glad to hear you are back online!
Team Mikado, Team Revolectrix, KBDD Team Pilot
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2013 03:19 AM  6 years ago
Retired2011

rrElite Veteran

Lee's Summit, MO

MyPosts All Forum Topic
Well I had a good time also and, as always, I learned a bunch more.

No luck getting the Logo sorted out yet...I'm beginning to think it's haunted and just doesn't want to leave Dennis.

Just ordered a 130X from AMAINHOBBIES...$199.99 (thank you Dennis)after you put it in your cart. Then a pop-up coupon came up for 10% off, so total (including shipping) @191.24
Chet
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 302 pages [ <<    <     68      69     ( 70 )     71      72     NEXT    >> ] 253871 views POST REPLY
Home✈️Aircraft🚁Helicopter🌐Clubs and Associations › *Official Eagles Associates RC Heli Club, Kansas City*
 Print TOPIC  Make Suggestion 

 50  Topic Subscribe

Tuesday, February 25 - 8:54 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online