WATCH |
302 pages [ << < 208 ( 209 ) 210 NEXT >> ] 261216 views | Post Reply |
RunRyder | RunRyder |
![]() |
![]() |
![]() rrKey Veteran Raytown, MO. |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrVeteran Kansas City |
Nice Nice video Micha. Noder really turned it up later!
Another great day. Lots of flyin. I flew about 15 times and I bet Pascal few double that. It was a very good day. |
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Kansas City, KS, USA |
![]() |
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Kansas City, KS, USA |
![]() |
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Raytown, MO. |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Raytown, MO. |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Kansas City, KS, USA |
@Nader: here is how I set up my auto bailout on the DX8. If you are not comfortable doing these on your own, we can do this together next time we meet at the flying field.In this setup: - Switch F-mode is flight mode. - Switch Hold is throttle hold. - Switch Gear is Bailout mode with motor idling. I do not use bank switching.DX8 Setup: - System menu switch select: Mix = AUX3, inhibit on others - System menu flight mode setup: F-Mode = F Mode, Hold = Mix - Throttle curves: as your regular curves for Normal, FM1 and FM2. - Mix1: AUX3 > THR. Rate = 0%/X% and Offset: 100%, where X% is your bailout value (from 5% to 45%, Mine is 30%). Chose: N12HM.After you have done this, you need to adjust the throttle travel on the DX8 so that it gets back to -100, +100 in the V-Bar PC software. If you do not do this, you will not get the motor idling during autorotation bail out.You also need the proper settings in the Gov II tab of the V-Bar PC software: check/enable both the "Autorotation bailout mode" and "Idle during bailout" options.This setup also allows me to have flat throttle curves for Normal, FM1 and FM2 (makes all three flight modes fully usable for inverted flying). The ESC arms if the throttle hold switch if on. The motor spools up as soon as the throttle hold switch is off.I you try on your own, make sure to remove main and tail blades and test your setup copiously on the bench to verify that it works fully and as expected.Do not hesitate if you have any questions. |
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrNovice Kansas City Misery |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
chaos024
rrApprentice Topeka,KS |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
Retired2011
rrElite Veteran Lee's Summit, MO |
No Alees' around that I know of. It'll be great to have another new one to check out...we are getting quite a diverse assortment of helis lately.Jim Swink I am very appreciative of all the help on the HC3SX.I'm certainly glad I made it out today. Looks like it's going to be a great year at Minor Park. |
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Raytown, MO. |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Raytown, MO. |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrApprentice raytown mo |
![]() |
SHARE PM EMAIL GALLERY Attn:RR Quote |
chaos024
rrApprentice Topeka,KS |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
Retired2011
rrElite Veteran Lee's Summit, MO |
![]() |
SHARE PM EMAIL GALLERY Attn:RR Quote |
Ed in Kansas
rrApprentice Kansas City, Missouri |
|
SHARE PM EMAIL Attn:RR Quote |
![]() rrVeteran Gladstone, MO. |
![]() ![]() ![]() |
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Raytown, MO. |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrApprentice lawrence, KS, USA |
Thanks Micha for the nice videos ![]() Thanks a lot Pascal for the setup info Dennis Thank you for helping me setup the Heli Great atmosphere awesome friends ![]() |
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Raytown, MO. |
![]() |
SHARE PM EMAIL GALLERY Attn:RR Quote |
WATCH |
302 pages [ << < 208 ( 209 ) 210 NEXT >> ] 261216 views | Post Reply |
RunRyder | RunRyder |
![]() |
![]() |
Monday, March 1 - 7:21 am - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies