RunRyder RC
WATCH
 1 page 741 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › AR7000 Issues.
01-31-2012 03:54 PM  6 years agoPost 1
jake21

rrApprentice

ontario canada

My Posts: All  Forum  Topic

Sometimes when I turn on my DX7 and then the heli the lights come on solid on the receiver but nothing works. Then I shut down and restart and every thing works good. Any one had this problem before?

The only way to not crash is up

PM  EMAIL  GALLERY  Attn:RR  Quote
01-31-2012 04:57 PM  6 years agoPost 2
maveric4

rrVeteran

england

My Posts: All  Forum  Topic

Try repeating with the TX some distance away from heli and receiver.

Sometimes if the TX is to close the signal just gets swamped

PM  EMAIL  GALLERY  Attn:RR  Quote
01-31-2012 11:20 PM  6 years agoPost 3
Discharger

rrApprentice

Perth, Western Australia

My Posts: All  Forum  Topic

Also, try rebinding but back off with the Tx at least 3m or more.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-01-2012 01:49 PM  6 years agoPost 4
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Metal will do it too, shelves, pickup truck beds, metal table tops.

As someone said, hold the transmitter a few feet away while linking.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
02-01-2012 02:55 PM  6 years agoPost 5
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

From the X9303 manual, something that should have been put into ALL manuals:

There is no need to re-bind. Just move the TX and cycle power.

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
02-01-2012 07:13 PM  6 years agoPost 6
Zaneman007

rrElite Veteran

Texas - USA

My Posts: All  Forum  Topic

Placement of the very short signal wire is very important.

Placing the active part of the antenna against carbon fiber though common can cause shadowing and loss of signal.

I would recommend holding the sats away from the heli, and giving that a try.

Old Guys Rule!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-01-2012 08:34 PM  6 years agoPost 7
jake21

rrApprentice

ontario canada

My Posts: All  Forum  Topic

Thanks Guys.
I have always been able to get it to work by changing location and re starting it. I now can see that this can be normal so everything is great.
Jake.

The only way to not crash is up

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 741 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › AR7000 Issues.
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Tuesday, August 21 - 8:56 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online