RunRyder RC
WATCH
 1 page 1009 views POST REPLY
HomeAircraftMulti-Rotor
e-
Multi-Rotor Discussions
Other News  NAZA !!!
01-30-2012 09:43 PM  6 years agoPost 1
Dr.Tim

rrElite Veteran

Mojave Desert

My Posts: All  Forum  Topic

Just received my DJI NAZA the other day and had time today to put it all together. I must say it was Simpler than I thought it would be, everything was well packaged and easy to find. The whole build took about 20 minutes! I then say down to download the Software to my laptop... pretty straight forward and No suprises!! Then I hooked up the NAZA to my laptop and proceeded to follow the instruction...Well, I had to backup and download the Driver .. I really need to FOLLOW the instructions .. Well once that was finished I went back to the NAZA assistant and FOLLOWED the instructions .. About 5 minutes later I checked Motor Directions and bolted on the Props, Held on to the bottom of the Flame wheel and started to Motors, Checked controls for proper direction, Everything looked good so I took her out front and to my surprise it lifted effortlessly into the air. This has got to be the Simplest and easy to setup and fly quad that I have ever put together! The NAZA Camera mount is next! Aerial Tech Systems and X468 has them in stock so I will let everyone know how well this mount works and the Camera Mount Stabilization from the NAZA controller works once I get it ordered out…. This just keeps getting better and better! I sure am enjoying flying these quads .. Very Relaxing.

Dr.Tim

From Simple minds come simple ideas! Approach Engineering

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-30-2012 10:41 PM  6 years agoPost 2
VKGT

rrElite Veteran

Sanford, NC

My Posts: All  Forum  Topic

That looks pretty nice! 20 minute assembly sounds easy enough. What's the total cost invested?

PM  EMAIL  GALLERY  Attn:RR  Quote
01-30-2012 11:42 PM  6 years agoPost 3
Dr.Tim

rrElite Veteran

Mojave Desert

My Posts: All  Forum  Topic

The NAZA / Flamewheel Quad complete with Motors and ESC's was $460 ...

From Simple minds come simple ideas! Approach Engineering

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-31-2012 02:58 AM  6 years agoPost 4
VKGT

rrElite Veteran

Sanford, NC

My Posts: All  Forum  Topic

Not bad at all! I recently invested in the HPQ1 with a camera mount but it's very docile and I don't think I can get aggressive with it but yours looks pretty awesome! http://rotorconcept.com/heli1.asp

PM  EMAIL  GALLERY  Attn:RR  Quote
01-31-2012 03:04 AM  6 years agoPost 5
regsanman

rrNovice

Shady Valley, TN

My Posts: All  Forum  Topic

Glad to hear how effortless it flies. The hexa version of this is going to be my very first rc vehicle ever, due out in a couple of weeks. I have been talking to Aerial Technologies and they have been really helpful and will actually be building it for me because I want it done right and I am not a model builder. I wanted something beginner easy, stable, and able to withstand abuse. Can't wait to try and fly it.

PM  EMAIL  Attn:RR  Quote
01-31-2012 01:01 PM  6 years agoPost 6
UAVProducts

rrApprentice

Mchigan, USA

My Posts: All  Forum  Topic

Yes, the F550 will be out before Feb. 15th we are told.

The build is VERY easy. Takes all about 20-30mins for the novice.
Sometimes its better to build it yourself so you have a better understanding of everything.

Robert
N.A. Dist for DJI
N.A. Dist. for PhotoHigher
Formerly DJIUSA

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-31-2012 07:53 PM  6 years agoPost 7
laddy

rrVeteran

Midland Texas

My Posts: All  Forum  Topic

Will they offer the 550 with motor and esc's only, no Naza controller? I already have the Naza on a quad.

Texas

PM  EMAIL  GALLERY  Attn:RR  Quote
01-31-2012 09:30 PM  6 years agoPost 8
UAVProducts

rrApprentice

Mchigan, USA

My Posts: All  Forum  Topic

Yes, it will be $390 for the F550 ARF. This include everything but the Naza.

Its on our site already and will be enabled as soon as the kits arrive next week.

Robert
N.A. Dist for DJI
N.A. Dist. for PhotoHigher
Formerly DJIUSA

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-01-2012 05:03 AM  6 years agoPost 9
laddy

rrVeteran

Midland Texas

My Posts: All  Forum  Topic

ok thanks. Time to sale off a new TRex550

Texas

PM  EMAIL  GALLERY  Attn:RR  Quote
02-01-2012 05:15 AM  6 years agoPost 10
Tyler

rrElite Veteran

Chicagoland area

My Posts: All  Forum  Topic

How nimble is a quad like this? Can they tumble, loop, roll, stall turn? Ive seen those automated videos on youtube where they can flips three times in the blink if an eye.

Always been intrigued but fearful of getting bored in a hurry.

Enjoy things that money can buy IF you don't lose the things money can't buy.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-01-2012 01:08 PM  6 years agoPost 11
Dr.Tim

rrElite Veteran

Mojave Desert

My Posts: All  Forum  Topic

In Manual mode it's VERY NIMBLE!! I have Done Loops and Rolls ... Very Nice setup!

Dr.Tim

From Simple minds come simple ideas! Approach Engineering

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1009 views POST REPLY
HomeAircraftMulti-Rotor
e-
Multi-Rotor Discussions
Other News  NAZA !!!
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Friday, August 17 - 11:48 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online