RunRyder RC
WATCH
 1 page 464 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignT-REX 450 › Trex 450 pro 1 way bearing
01-29-2012 03:01 PM  7 years ago
Topic Vote0Post 1
Jej34

rrApprentice

N.J

MyPosts All Forum Topic
Trex 450 pro 1 way bearing
Has anyone seen this one. If I hold the motor from spinning with my fingers and rotate the head, the head spins. It should be locked. Almost as if the bearing is spinning in the holder.
Anyone else see this?
I bought it as a kit, it ended up a kit!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 04:06 PM  7 years ago
Heli 770

rrProfessor

USA.

MyPosts All Forum Topic
Not if you're rotating the head clock wise.
SHARE  PM  EMAIL  Attn:RR  Quote
01-29-2012 07:32 PM  7 years ago
Jej34

rrApprentice

N.J

MyPosts All Forum Topic
Yeah, very strange. Maybe it's not fully blow??
I'll pull it apart and see exactly what's going on.
I bought it as a kit, it ended up a kit!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 07:41 PM  7 years ago
Heli 770

rrProfessor

USA.

MyPosts All Forum Topic
It just might be because of grease or dirty, I only use light oil or ATF on my OWB.
SHARE  PM  EMAIL  Attn:RR  Quote
01-30-2012 02:37 AM  7 years ago
Jej34

rrApprentice

N.J

MyPosts All Forum Topic
I pull it out of the heli and can't get it to slip " on the bench"
My guess is that the main gear bolt was too tight, distorting the sleeve and causing slippage. I put it back together and paid attention to the torque on the bolt, slippage is gone.
I bought it as a kit, it ended up a kit!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 464 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignT-REX 450 › Trex 450 pro 1 way bearing
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Wednesday, September 18 - 6:39 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online