Im using Krontronik 60LV on my Logo 400 with Scorpion 3226-1400 using 18t pinion. I set it up using Mr Mel's video... It happened that my end points were 96 so I set it up on Idle 1 using 75 straight curves and 90 straight curves on idle 2..
Weird thing is when I got my helicopter, it had the align 70A ESC on it and I was using 100 fixed endpoints.. The power was mind boggling, I was using 15 -15 pitches with awesome power.. When I put the Krontronik 60LV on, I dont see the same power on it..
Maybe someone here who lives in Surprise, Az or Phoenix can help go over my ESC setup using spektrum and double check that I have indeed programmed it correctly... If you dont have experience in actual Krontronik setup, please dont waste my time
This is a FBL logo using MiniVbar.. I just expected more power and more efficiency using the 60LV but seems not to be the case..
Please PM me privately if you can help.. Ive asked a few people in the past through PM's but want to CONFIRM and be sure that it is set up correctly.
FYI Im also using 65C 2700 mah packs so the packs arent the issue.
Crash-Prone and overcoming it!!!