RunRyder RC
WATCH
 1 page 1625 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Futaba FASST › How to setup the fail safe on 2.4G Rx using Futaba 9C TX
01-28-2012 03:33 PM  7 years ago
Topic Vote0Post 1
Eytan

rrApprentice

Israel

MyPosts All Forum Topic
How to setup the fail safe on 2.4G Rx using Futaba 9C TX
Hi
I have the old 9C Futaba Tx with an external 2.4G Futaba FASST module.
I am using the 7C Futaba Rx 2.4G FASST

All is working ok except I cant set up the failsafe mode.
(The radio is on ppm for working with the external Tx module)

Any advise?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2012 04:25 PM  7 years ago
modtron

rrKey Veteran

Oxford. UK

MyPosts All Forum Topic
Because those radio do not use Multi Mode transmission, you can only set the throttle channel (3) to failsafe.
All other channels will just hold their current position.
To use the 2.4ghz module you have you select PPM output.

modtron
Oxford UK
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1625 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Futaba FASST › How to setup the fail safe on 2.4G Rx using Futaba 9C TX
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, October 20 - 3:53 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online