RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2780 views POST REPLY
Home✈️Aircraft🚁Helicoptere-MikadoOther › Xxtreme servo's
01-26-2012 11:47 PM  7 years ago
Topic Vote0Post 1
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
Xxtreme servo's
What servo's are you all using for the Xxtreme?
Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-26-2012 11:49 PM  7 years ago
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

MyPosts All Forum Topic
I think you should get something HV and fly directly on a RX pack.Team Synergy, Rail blades, Team Scorpion, V-Team
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-26-2012 11:54 PM  7 years ago
RobMcQuillen

rrKey Veteran

Rochester, NY

MyPosts All Forum Topic
Futaba BLS157HV for cyclic and Futaba BLS256HV for the tail.

Rob
Rob McQuillen
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2012 12:03 AM  7 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
Did you notice in the manual they showed Savox servos?Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2012 12:08 AM  7 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
Anyone know the minimum Torqe servo you should use?Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2012 12:09 AM  7 years ago
mmc205

rrElite Veteran

PA - USA

MyPosts All Forum Topic
i'd go with 9252's.***Logo 600 vbar***Henseleit TDR vbar***
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2012 12:12 AM  7 years ago
Dood

rrProfessor

Wescanson

MyPosts All Forum Topic
Look at the BLS156HV
6.0V 250 oz-in (18.0 kg/cm) 0.15 sec/60°
7.4V 292 oz-in (21 kg/cm) 0.12 sec/60°
Tower's Low Price: $159.99
And then the BLS157HV
6.0V 431 oz-in (31.1 kg/cm) 0.14 sec/60°
7.4V 514 oz-in (37 kg/cm) 0.11 sec/60°
Tower's Low Price $189.99
  ▲
▲ ▲
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2012 09:39 PM  7 years ago
Magneto 3D

rrNovice

Boston MA.

MyPosts All Forum Topic
The 156 and 157 spec out well for this heli Jr8717hv are great too,I was going to use bls 255hvs like on my 700 but went with 157s for the extra torque. As far as minimum torque id say 200in ozs and up.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 12:40 AM  7 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
I have a BN set of JR 8711 HV, I'm wondering if they will do the job?Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 04:24 AM  7 years ago
Band1086

rrElite Veteran

Kennewick, Wa. USA

MyPosts All Forum Topic
Uh, yeah!
i'd go with 9252's.
That's a 10 year old servo, isn't it?
Not sufficient for the big helis.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 12:43 PM  7 years ago
mmc205

rrElite Veteran

PA - USA

MyPosts All Forum Topic
it was a joke. the fact that you remember them being popular though shows your age ***Logo 600 vbar***Henseleit TDR vbar***
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 01:21 PM  7 years ago
MrMel

rrProfessor

Gotland

MyPosts All Forum Topic
Anyone know the minimum Torqe servo you should use?
it's possible to fly it on BLS451 on 7.4v which translates to about 12-13kg

So that said, it should be doable with BLS255HV too on high voltage.

I recommend going a bit higher in torque though, I would have used the BLS156 myself (or BLS157)

In this case I have servos laying around at home (JR8717) so I do not need to purchase any since I will use them.
Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 03:12 PM  7 years ago
Band1086

rrElite Veteran

Kennewick, Wa. USA

MyPosts All Forum Topic
it was a joke. the fact that you remember them being popular though shows your age
Thought so...yeah, I still have a few I think...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 04:41 PM  7 years ago
mto

rrNovice

Vienna, AUSTRIA

MyPosts All Forum Topic
JR 8925HV for cyclic and Futaba BLS256HV for the tail.

(BEC 8.4V)

Xxtreme arriving on Tuesday...

Thomas
Live long and prosper :)
SHARE  PM  EMAIL  Attn:RR  Quote
01-29-2012 06:42 PM  7 years ago
blakes

rrNovice

buenos aires argentina

MyPosts All Forum Topic
and what BEC?????
i disered no lipo 2S but hv bed don't work in parallel with ESC
SHARE  PM  EMAIL  Attn:RR  Quote
01-29-2012 07:17 PM  7 years ago
RobMcQuillen

rrKey Veteran

Rochester, NY

MyPosts All Forum Topic
I'm going with the WR Super Hercules BEC

I just sent mine in for the conversion to 7.4v for Futaba Servos

http://www.western-robotics.com/her...per-BEC_hp.html

10a/15a max @14s input

Rob
Rob McQuillen
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 10:44 PM  7 years ago
Dood

rrProfessor

Wescanson

MyPosts All Forum Topic
I'm just thinking-- It might have been a good idea for Mikado to have designed a 4 servo CCPM swash to negate the need for super-servos.  ▲
▲ ▲
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-31-2012 12:21 AM  7 years ago
synodontis

rrKey Veteran

United Kingdom

MyPosts All Forum Topic
I'm just thinking-- It might have been a good idea for Mikado to have designed a 4 servo CCPM swash to negate the need for super-servos.
cut a long story short, it doesn't work and what happens is we have a game of: which servo dies first!!! because they would bind the hell out of each other!
i'd go with 9252's.
what person in their right mind would put a 9252 in a machine like this!!!??? are you barking? even better, the only reason why I see Futaba producing 9252s is probably the only reason why they still produce the 9202s - because there is still some kind of demand for a relatively cheap servo. both of these servos should preferably be consigned to history.

9255s minimum.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-31-2012 12:58 PM  7 years ago
mmc205

rrElite Veteran

PA - USA

MyPosts All Forum Topic
what person in their right mind would put a 9252 in a machine like this!!!??? are you barking?
Read the thread a bit more carefully. I was joking. I thought that would be obvious.
***Logo 600 vbar***Henseleit TDR vbar***
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-01-2012 10:19 AM  7 years ago
KC

rrElite Veteran

WA

MyPosts All Forum Topic
nothing is obvious online...even if you spell it out.

I've used 9252s in an 800. Depends on the application.

Don't knock the old 9252s in an 800, they're proven (800s have been around for a long time, even 3d 800s, this is just the first one that catches the idea of a big bad better heli)

not every application needs torque or speed, some need precision and longevity..plastic gears are best for that and theyre are many APs using 9252s

I wouldnt be afraid to fly an xxtreme on 9252s, 100 oz per axis worked with mechanical FBL 680mm helis in the day. A little fifth grade math and you can impress/scare your friends too.

a ccpm 8717 at 5 volts has 15 times more torque per axis than the raptor 90 had on any of its controls 5-6 years ago. Any of the latest 700 servos will be enough.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2780 views POST REPLY
Home✈️Aircraft🚁Helicoptere-MikadoOther › Xxtreme servo's
 Print TOPIC  Make Suggestion 

 9  Topic Subscribe

Tuesday, October 22 - 4:43 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online