RunRyder RC
WATCH
 1 page 476 views TOPIC CLOSED
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsAlign 3G › sd 10 g with gaui 425 and 3g
01-26-2012 12:37 AM  7 years ago
Topic Vote0Post 1
BK479

rrApprentice

usa

MyPosts All Forum Topic
sd 10 g with gaui 425 and 3g
Hello I am haveing problems with this set up have been for months i feel like this

OK i have done the finless bob on the servo horns. all the belcranks are 90 and the swash is level. today i went to the dir mode on the 3g unit and the swash moves great. step 2 set the EL limits and step 4 the AI limits. the final results are the swash isn't moving level up and down. now it looks like the 2 front servoes are moving more than the EL servo or the EL servo isnt moving enough. also at 0 pitch mid-stick the blades are facing to the nose and tail. when i move the EL stick up and down you can see the blades moving. when you shouldn't see any movement at all. and no there isn't any mix on in the radio, i can start with a new model and it does the same thing.

epa all at 100
D/R all at 100
cepa all at 100

swash
---------------Master
----------(EL)-(AI)-(PI)
S...(EL) -60 ----- +65
L...(AI) +30 - 60 +65
A...(PI) +30 +60 +65
V.
E.

Any help would be great Thanks Brian

I feel like takeing a BFH to the radio and 3g
SHARE  PM  EMAIL  GALLERY  Attn:RR
01-26-2012 01:22 AM  7 years ago
jsenicka

rrProfessor

Eagle River, WI

MyPosts All Forum Topic
what does this mean?
swash
-60 ----- +65
+30 - 60 +65
+30 +60 +65

don't understand the swash settings on the SD10
Jim Senicka
Team Manager, GrandRC Flight Team
SHARE  PM  EMAIL  GALLERY  Attn:RR
01-26-2012 01:38 AM  7 years ago
BK479

rrApprentice

usa

MyPosts All Forum Topic
yes that is what it looks like in the swash menu
SHARE  PM  EMAIL  GALLERY  Attn:RR
01-26-2012 04:31 AM  7 years ago
TMoore

rrMaster

Cookeville, TN

MyPosts All Forum Topic
what does this mean?
swash
-60 ----- +65
+30 - 60 +65
+30 +60 +65

don't understand the swash settings on the SD10
The swash menu on the SD-10G is different than JR radios.

Your values are out of sync because on a 120 degree CCPM the values need to be half for the EL to PI function so your 65 values need to come down to 60 and if you need to increase PI go to the EPA values in the Surface menu and bump up the PI EPA.

The 3G is a POS FBL controller and if you have their latest software in it when you move the collective pitch on the bench you will see the elevator move back and forth like there is an EL input being put into the system. This is quite normal for their latest rev of software and there is no need to try and mix it out in the radio.

TM
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 476 views TOPIC CLOSED
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsAlign 3G › sd 10 g with gaui 425 and 3g
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, September 19 - 7:14 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online