RunRyder RC
WATCH
 1 page 889 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade mCPX › tail blowout on mCPX
01-25-2012 07:53 PM  7 years ago
Topic Vote0Post 1
Tampa

rrNovice

Tampa, F

MyPosts All Forum Topic
tail blowout on mCPX
I've figured out that I almost never crash when flying the larger batteries (300 mah 30c) even though I'm much more aggressive with them. And I've narrowed that down to the fact that my tail (stock) virtually never blows out with the higher power batteries. However I blow my tail out several times per flight with the stock 200mah 20 c batteries. And if I'm not flying high enough I don't have the power or time to recover and the results are often crashes. Fortunately I fly over grass so damage is generally minimal. So from now on I'm using my 200 mah batteries for easy, basic puttering around. The larger batteries will be for all 3d or just plain fast flying around. Has anyone else noticed this?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-26-2012 02:34 AM  7 years ago
Eco8gator

rrElite Veteran

Palm Beach, FL

MyPosts All Forum Topic
Have you swapped your tail boom for one that is made of solid carbon and is 5.5in long.

Id start there.

The stock packs have just enough umph and they do sag more so than they probably should under load which really affects the tail. It's not as bad with the long boom though.

From there buy 10x 300mah packs and you will be good to go.

C
Xera Motors
ProBar
Minicopter
Thunder Power
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 889 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade mCPX › tail blowout on mCPX
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, September 19 - 1:30 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online