RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1405 views Post Reply
Home✈️Aircraft🚁HelicopterBeginners Corner › New Member in Alabama
12-15-2011 11:01 PM  9 years ago
Topic Vote0Post 1
SGM Retired

rrApprentice

Toney, AL. USA

MyPosts All Forum Topic
New Member in Alabama
Hello everyone I'm brand new to this RC sport and have purchased the Blade SR as my first Heli. Have had it for 3 weeks now and have not got it into the air yet. Question is how long do I fly simulator before powering up real Heli? I'm on the sim every night and can some what hover but not holding completely. Is there some moves I should try and master before throdleup? I have been to the field here in Huntsvill but never see anyone to ask questions there or to just watch. Must be the Holidays? Thanks for your help in advance.

Gary
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-15-2011 11:10 PM  9 years ago
Chanceyman

rrApprentice

Riverview, FL

MyPosts All Forum Topic
The first and most important thing to learn to do, be it on the sim or on a starter heli is to hover in all orientations.

The biggest mistake I see people at the field do is learn to get the heli in a semi stable hover then the next thing they learn to do is fly around. If you learn to fly before you learn to hover (and trust me flying is for the most part easier than hovering) you will become bored and never learn all your orientations.

Next thing you know the heli comes out of a loop funny or rolls weird and pow you have piled it in. The blade series is a little different because you are not going to be looping and rolling but I say learn the basics before attempting to FLY.

If you can hover in all orientations you will rarely have a crash.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-15-2011 11:30 PM  9 years ago
SGM Retired

rrApprentice

Toney, AL. USA

MyPosts All Forum Topic
Orientation flight
Thanks for that info, I have turned in all directions and it is harder to think backwards for roll. Should I always keep trimming with slides for roll or should I just keep right stick with a little yaw and pitch?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-15-2011 11:47 PM  9 years ago
Chanceyman

rrApprentice

Riverview, FL

MyPosts All Forum Topic
With the small helicopters its a tricky question. A little bit of elevator or aileron is not that big of a deal because such little weight can throw the CG off from one flight to the next.

On a larger helicopter you ultimately want everything mechanically trimmed. This would mean adjusting the links and or servo horns to be at the correct angles.

On a side note, you should not have an extreme angle on the swash plate in order to keep the heli stable. It should almost appear perfectly level to the naked eye, maybe a degree or two off.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-16-2011 12:02 AM  9 years ago
SGM Retired

rrApprentice

Toney, AL. USA

MyPosts All Forum Topic
Wow
With all that info you just stated I have a lot of learning to do. Are there books to read or should I just read the book that came with my Heli a few times? I can see sitting down with someone and doing the show and tell thing with me. I was hoping or just thinking that the right stick could be left zeroed and the craft should stay in place except for wind variations, is that the case or should you always keep right stick moving to keep stable?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-16-2011 12:18 AM  9 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
Welcome to a sport that may get you addicted! The Blade you have now is just the tip of the iceberg, if you stick with it!
Spend as much time as you can on the sim until you are comfortable.
Good Luck,
Wrongler
Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-16-2011 12:27 AM  9 years ago
SGM Retired

rrApprentice

Toney, AL. USA

MyPosts All Forum Topic
Thanks Wrongler
I'm on the sim now doing what Chanceyman stated but it's hard to hold steady. I do better keeping some trim pitch forward and I then keep a slight hold back to keep pressure on my rigt stick. Is it better to always keep steady trim on one so as to "keep a feel" on the craft?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-16-2011 12:33 AM  9 years ago
Pistol Pete

rrProfessor

Seffner, FL

MyPosts All Forum Topic
Welcome aboard.

Here's some good reading material and or a place to start.

http://www.rchelicopterfun.com/index.html

You can then do specific searches in here and or ask away to get anything from basics to theories and formulas. Overwhelming amount of information in here in all levels.
~~Enjoying the hobby one flight at a time~~
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-16-2011 01:18 AM  9 years ago
SGM Retired

rrApprentice

Toney, AL. USA

MyPosts All Forum Topic
Thanks
Thanks Pistol Pete, I started reading at that site and got to the part that said the Blade SR is not a good Heli. Wow that was depressing!! I have got to go with what I have unroll it meets it's fait. Will keep reading and hope to find someone near by to "walk the talk". Thanks again everyone, it sure brings up the strees level a notch when talking with the group here to try and understand the lingo.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-16-2011 02:17 PM  9 years ago
Pistol Pete

rrProfessor

Seffner, FL

MyPosts All Forum Topic
Take that comment as its not the best heli to "start" with.

Most likely meant as not one you can grow with but any heli is better than none in my book. We all have helis collecting dust on a shelf as we all had to start somewhere.

Best of luck!
~~Enjoying the hobby one flight at a time~~
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-16-2011 02:29 PM  9 years ago
SGM Retired

rrApprentice

Toney, AL. USA

MyPosts All Forum Topic
Thanks
Thanks for that comment Pistol Pete, I have sent an email to my local area heli club and hope they can point mt in the right way. I can see this forum being a good life line for me.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-21-2011 03:29 AM  9 years ago
Stephen Born

rrElite Veteran

USA

MyPosts All Forum Topic
When you do start to fly the SR, the tail is wickedly wild. There are several videos on YouTube that confirm the wag. Another piece of foam (gyro tape) will help tame her.
SHARE  PM  EMAIL  Attn:RR  Quote
12-21-2011 03:58 AM  9 years ago
SGM Retired

rrApprentice

Toney, AL. USA

MyPosts All Forum Topic
First flight
I had my first flight yesterday, got up to 2" but did not crash. The tail is stil an issue. When I go to spool up the rotor is at at speed and kicks tail to right before I power down. The only way to power up to start lift I must hold ruter stick hard left and the spool up. At half power before lift I can ease ruter back right to start to lift. What a mess this is. I did the gyro test tonight as in unplug main rotor then power up and after gyro is ready. I then turn tail to to and the rotor should kick in but itoy does it every now and then. When it does kick in its wide open throtle. Not sure what to do next?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-21-2011 04:09 AM  9 years ago
Stephen Born

rrElite Veteran

USA

MyPosts All Forum Topic
Told you the tail is trouble. There is a modifying remedy. Do you watch YouTube?
SHARE  PM  EMAIL  Attn:RR  Quote
12-21-2011 04:16 AM  9 years ago
Stephen Born

rrElite Veteran

USA

MyPosts All Forum Topic
Go to YouTube, type in "blade SR fix that annoying tail." This video will assist in calming that tail down by 80%. Are you using the stock radio?
SHARE  PM  EMAIL  Attn:RR  Quote
12-21-2011 02:12 PM  9 years ago
Pistol Pete

rrProfessor

Seffner, FL

MyPosts All Forum Topic
This one perhaps?

Watch at YouTube

~~Enjoying the hobby one flight at a time~~
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-21-2011 02:26 PM  9 years ago
Stephen Born

rrElite Veteran

USA

MyPosts All Forum Topic
Thanks Pistole Pete,

That is the video.

Below is a Blade SR review. Please watch the video. It will give you an HONEST REVIEW OPINION.

Watch at YouTube

SHARE  PM  EMAIL  Attn:RR  Quote
12-21-2011 02:41 PM  9 years ago
SGM Retired

rrApprentice

Toney, AL. USA

MyPosts All Forum Topic
You tube
I just the video but the only issue is that I have not seen the tail wag yet. The issue is when I spool up I can not have the left stick in the middle left to right or the tail will go like a bat out of hell and throws tail to right. The only way I can correct is on power up I hold the rudder hard left and the main blade starts turning and when I get torqu up I can then ease rudder stick back right ( center) to continue lift. When I did the gyro test last night on the table from the book it did not respond correct also. I unplugged main rotor, powered up with stick at half trodel and then twisted nose to left (tail right) to see if rudder motor kicks in. Well it did not, only kicks in when I pick the heli up and spin in a circle. Not sure what's going on with this this.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-21-2011 02:53 PM  9 years ago
Stephen Born

rrElite Veteran

USA

MyPosts All Forum Topic
Sounds like you might have a faulty direct drive tail motor. The tail motor is a brushed motor. Since it has to be small, they are prone to failure due to overheating.

After your flight, is the tail motor hot?

So before you even take off, your already putting inputs (left) to try to keep it stable?
SHARE  PM  EMAIL  Attn:RR  Quote
12-21-2011 02:54 PM  9 years ago
Pistol Pete

rrProfessor

Seffner, FL

MyPosts All Forum Topic
Still sounds to me like a gain issue. The "tail fix" video talks about that around the 5 min mark. Channel 5 dial is for such.

As long as the tail is holding in flight, I would not worry about a small kick during spool up as there is not enought rotor speed to compensate for such. All you can do is spool her up slower. This is pretty much a common issue among small helis.
~~Enjoying the hobby one flight at a time~~
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1405 views Post Reply
Home✈️Aircraft🚁HelicopterBeginners Corner › New Member in Alabama
Print TOPIC

 2  Topic Subscribe

Thursday, June 17 - 4:08 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online