RunRyder RC
WATCH
 18 pages [ <<    <     7      8     ( 9 )     10      11     NEXT    >> ] 44867 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 600 › TREX 600EFL PRO OFFICIAL THREAD 2
03-04-2012 08:27 AM  9 years ago
ANDZIO

rrNovice

Krakow Poland

MyPosts All Forum Topic
Magnets are 15mm.
Best buy a pair to be undercut sticking in the hole.
In this undercut retracts the bolt head.
As we have no pairs, you need to brush up a little to hide its head screws.
Grinding of the magnet is difficult-but not impossible.
SHARE  PM  EMAIL  Attn:RR  Quote
03-04-2012 08:29 AM  9 years ago
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

MyPosts All Forum Topic
You can buy the mags on ebay, pretty cheap too
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2012 02:40 PM  9 years ago
soupy01833

rrNovice

georgetown,ma

MyPosts All Forum Topic
What else did you use?

some washers on the canopy and are those the regular canopy grommets or some other type of runbber washer or o-ring?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2012 10:50 PM  9 years ago
Jej34

rrApprentice

N.J

MyPosts All Forum Topic
Who's oiling???

Are you guys oiling your Aligm motor? If so, what type and how often?

Thanks
I bought it as a kit, it ended up a kit!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2012 10:57 PM  9 years ago
ncarbon

rrApprentice

Kalispell Montana

MyPosts All Forum Topic
Oiling
I am, using the Scorpion motor oil, say every 10 flights or so. I must have almost 300 flights on my 600. I have also re lubed the OWB and thrust bearings periodically, say at 100 flights.

Ned
It is............what it isn't!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2012 12:48 AM  9 years ago
Jej34

rrApprentice

N.J

MyPosts All Forum Topic
How do you do the bearing on the top, do you just put a drop on the shaft that's sticking out and it will seep down?

Thanks
I bought it as a kit, it ended up a kit!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2012 01:36 AM  9 years ago
ncarbon

rrApprentice

Kalispell Montana

MyPosts All Forum Topic
Yes
I do the 600 and the 500 the same, add a few drops and rotate the motor.

Ned
It is............what it isn't!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2012 03:12 AM  9 years ago
michael88997

rrElite Veteran

Lewisville,Tx

MyPosts All Forum Topic
Don't the align motors have shielded bearings?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2012 03:42 AM  9 years ago
ncarbon

rrApprentice

Kalispell Montana

MyPosts All Forum Topic
Shielded...not sealed
Scorpion has a good "how to" video on bearing oiling.

Ned
It is............what it isn't!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2012 01:46 AM  9 years ago
rudyy

rrElite Veteran

E. Amherst, NY

MyPosts All Forum Topic
After seeing more and more good comments, and finding one hardly for sale, I join in you guys.. just order a FBL version from Heliproz South.

This is my 3rd electric heli in my fleet. I got a Trex 500E FBL and 550E FBL. Hopefully, I will like this 600E Pro FBL.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2012 12:06 PM  9 years ago
Manny1776

rrVeteran

Melbourne, Florida. USA

MyPosts All Forum Topic
You will love it!Fly High, Fly Fun, Fly Secure.........Fly 3D!!!! Bavarian Demon USA Team
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2012 09:10 PM  9 years ago
bigbadflyer

rrVeteran

Middle Earth New Zealand

MyPosts All Forum Topic
They are great helis. You wont be disappointedNew Zealand Helicopter Sheep Hearding Champion :-)
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-16-2012 02:04 PM  9 years ago
rudyy

rrElite Veteran

E. Amherst, NY

MyPosts All Forum Topic
Turnogy Batteries
Which one I should go for and why? Both are about the same price.

Turnigy 6S 3000mah 35C or 6S 3300mah 30C
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-17-2012 04:25 PM  9 years ago
basmntdweller

rrKey Veteran

Indianapolis IN

MyPosts All Forum Topic
One of my biggest gripes about Align helis is total lack of parts listings. I dumb thumbed my 600EFL thursday and need parts. Anybody know of a comprehensive listing showing all the different versions of parts? I need to know how to ID which version of parts I need.

Thanks, Matt

Stupid people have no idea how stupid they are!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-17-2012 06:09 PM  9 years ago
ncarbon

rrApprentice

Kalispell Montana

MyPosts All Forum Topic
Here ya go
A fellow on HF created this and did a GREAT Job!

https://rc.runryder.com/gallery/721....7PartsList.pdf

**Credit goes to jonny1 on HF.....a Big Thank You**

Ned
It is............what it isn't!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-17-2012 07:51 PM  9 years ago
relax1

rrVeteran

Tampa, FL

MyPosts All Forum Topic
cheapest place to buy a 600efl combo?
Thanks
Luis
I swear never to try that trick again! What the hell is only money!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-18-2012 01:47 AM  9 years ago
ZS-JAF

rrVeteran

Nazareth, PA

MyPosts All Forum Topic
E- Bay
I have two of these heli's and look at ebay just for fun.

http://www.ebay.com/itm/Align-Trex-...=item3372f97f32

That is the best deal I know off. I have not bought any thing from these guys but they have a really nice shop in FL
I have a 3D heli, I don't understand why it doesn't do 3D.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-23-2012 04:07 AM  9 years ago
rudyy

rrElite Veteran

E. Amherst, NY

MyPosts All Forum Topic
Finally, my 600E Pro is in shape. I have put in all the servos and motor. It is just missing the FBL head and drivetrain. The next thing will be putting on AR7200BX and CC ICE 80 HV ESC.

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2012 12:27 PM  9 years ago
Lewd Skywalker

rrApprentice

Manila, Philippines

MyPosts All Forum Topic
Hi may I ask as follows:

1. What is the designed headspeed of the T6efl?
2. Can I use 2400 on gov mode on Ice Hv80 even if there is the warning that hs is too high?

I am asking because lately I've been putting my T6 thru it's paces and it's a bit windy in our airfield and I've experienced several tail blowouts during simple continuous flipping and on two occasions during funnels.

I'm currently running 2250 headspeed. I read something about the tail ratio being lower compared to the old T6ESP and on Alan's FB he mentioned to one guy to run at 2400. Is 2400 too high? Will 2400 prevent unwanted tail blowouts?

Many thanks in advance.
SDX FBL | Eagle3 SWM | Trex 600EFL Pro
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-03-2012 06:14 AM  9 years ago
paulpeffly

rrApprentice

Knightdale, NC US

MyPosts All Forum Topic
2400 is not to high.. Alan tested it at higher than that I believe. and that should fix your tail blowout. and yes you can set the gov to 2400 but it just not have the right amount of overhead to govern properly. but really 2400 is not necessary. you should just get some 105mm tail blades and that will fix the prob. I fly at 2250 and it is really all the power you need in my opinion. im running 107mm tails, no blowouts. hope this helpsTeam HeliDirect
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 18 pages [ <<    <     7      8     ( 9 )     10      11     NEXT    >> ] 44867 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 600 › TREX 600EFL PRO OFFICIAL THREAD 2
Print TOPIC

 45  Topic Subscribe

Tuesday, July 27 - 7:24 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online