RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 633 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityOutrage › Outrage 50 head measurements
10-30-2011 08:17 PM  6 years agoPost 1
John Krebs

rrVeteran

Pittsburgh, PA

My Posts: All  Forum  Topic

Just getting back into flying after a two year absence. I want to convert one of my helis to FBL and I am planning on using the Outrage head and the CGY750. I have a TM14 module coming for my 12Z and a R6203SB receiver to go with the CGY750.

I would like to know the following if anyone has the parts sitting the bench.

How long is the main shaft?
What is the distance between the holes?
Bottom hole to top hole?
Bottom hole to lower upper hole?
On the head block, the distance from the Jesus bolt hole to the spindle centerline?
The distance between the blade bolt holes?

I will be converting either a Hirobo CCPN EVO 50 or a Raptor 50 which currently has an MA Excel head on it. I think the EVO would be the better canidate.

Thanks
John

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-31-2011 10:17 AM  6 years agoPost 2
dkpodder

rrNovice

Vinderup, DK

My Posts: All  Forum  Topic

How long is the main shaft: 178 mm.
Bottom hole to top hole: 156 mm.
Bottom hole to lower upper hole: 151 mm.
the distance from the Jesus bolt hole to the spindle centerline (center to center): 32 mm. / 27 mm. / 22 mm.
The distance between the blade bolt holes: 144 mm.

All measurements are aprox., but meassured with analog caliper.

PM  EMAIL  Attn:RR  Quote
10-31-2011 01:02 PM  6 years agoPost 3
John Krebs

rrVeteran

Pittsburgh, PA

My Posts: All  Forum  Topic

Thanks dkpodder,

Off to measure my EVO.

John

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 633 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityOutrage › Outrage 50 head measurements
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, June 24 - 11:36 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online