RunRyder RC
WATCH
 1 page 929 views POST REPLY
HomeAircraftHelicopterSynergy R/CSynergy N5c › N5c FBL head links
10-30-2011 12:56 AM  6 years agoPost 1
THX1138

rrElite Veteran

Indianapolis, IN

My Posts: All  Forum  Topic

Has anyone used the different holes on the head? I am wanting to use the middle hole just to bring the CG a little closer in. So far as I can tell, I need a 70mm control rod to pull this off.

I am looking at the Da Vinci 72mm x 2.2mm turnbuckles. Any one have any experience with these?

Lou

Just give me five dudes and two flashbangs...

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2011 04:09 AM  6 years agoPost 2
Tommy Wagner

rrNovice

Florida

My Posts: All  Forum  Topic

I'm using The synergy 65mm links and the middle hole on the head the links are 2.5mm part #107-65

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2011 08:08 PM  6 years agoPost 3
maj

rrVeteran

united Kingdom

My Posts: All  Forum  Topic

I use the upper most hole so lowest possible head height with 65mm mikado 2.5mm rods, swashdriver sits at bottom of the head and reduce your swash to bell crank rods a little by turning in a few times. Still get +-14.

I have my N5 and N5C with the above.

MJ

PM  EMAIL  Attn:RR  Quote
11-19-2011 12:04 AM  6 years agoPost 4
nwmtech

rrApprentice

Bellingham, WA

My Posts: All  Forum  Topic

Lowest head position on mine with DaVincis

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 929 views POST REPLY
HomeAircraftHelicopterSynergy R/CSynergy N5c › N5c FBL head links
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, July 18 - 3:39 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online