RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 830 views POST REPLY
HomeAircraftHelicopterRadio - Futaba FASST › R6106HF receiver ?
10-28-2011 08:14 PM  6 years agoPost 1
cwright

rrKey Veteran

Blossvale New York

My Posts: All  Forum  Topic

I have an 8FG Super radio that I want to use in my Trex 450. Switching over from JR. Is the R6106HF a good receiver to use with my 450 and will it work with my 8FG? Thanks. Chuck

PM  EMAIL  GALLERY  Attn:RR  Quote
10-28-2011 08:20 PM  6 years agoPost 2
helibrat

rrApprentice

West Babylon, NY

My Posts: All  Forum  Topic

Hi Chuck.

It will work fine with the 8FG and the 450. There's a thread on the same subject...

https://rc.runryder.com/t581591p1/

Gerry

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-28-2011 08:43 PM  6 years agoPost 3
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

My Posts: All  Forum  Topic

See here for the full list:

http://futabarc.com/receivers/air.html

Team Synergy, Rail blades, Team Scorpion, V-Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-28-2011 10:48 PM  6 years agoPost 4
cwright

rrKey Veteran

Blossvale New York

My Posts: All  Forum  Topic

Thanks guys. You might know the one time I don't do a search the information is there. I usually do a search. Guess I better go back to doing that. I did buy the receiver so I will be putting it in tonight and tomorrow. One step closer to having all my RC, except Bind and Fly converted to Futaba. Thanks again. Chuck

PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2011 01:42 AM  6 years agoPost 5
cwright

rrKey Veteran

Blossvale New York

My Posts: All  Forum  Topic

Problem with servos
Bought the receiver today and installing it my 450. I am having a problem with the servos. They are very eractic acting. They gitter up and down and sometimes don't move or creep up. Almost like they aren't getting power. Work fine my JR radio and receiver. The receiver shows that it is in normal mode by flashing red and not in high speed mode. The servos are Hitec HS65MG, not the digital ones. I am really stumped on this one. I would think that in the normal mode these servos would be compatable. I also have the transmitter setting 7 channel in the modulation menu as that is the only way I could get the receiver to link up. Any ideasB? Thanks Chuck

PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2011 02:05 PM  6 years agoPost 6
cwright

rrKey Veteran

Blossvale New York

My Posts: All  Forum  Topic

Problem with servos solved. The receiver was in high speed mode. I can blame myself for not understanding how to switch modes and the light status for each mode. That won't happen again. Now if it warms up a little I will try it out. Can't wait. Thanks for the help guys. Chuck

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 830 views POST REPLY
HomeAircraftHelicopterRadio - Futaba FASST › R6106HF receiver ?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, June 24 - 5:44 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online