RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 542 views POST REPLY
HomeAircraftHelicopterEngines Plugs Mufflers Fuel › OS 50SX- H Hyper Do I need a new Piston Pin?
10-28-2011 02:42 PM  6 years agoPost 1
yi0rgos

rrNovice

Limassol, Cyprus (Europe)

My Posts: All  Forum  Topic

Hi Guys,

I am not sure if I should change the Piston Pin and the Connecting Rod.
The connecting rod moves freely on the pin unless I apply some pressure then I feel some friction.

Also I tried to remove the piston pin, but it will not move due to time and residue built-up ...any ideas how to free it up Shall I put it acetone for a day or two?
Regards,

George

PM  EMAIL  Attn:RR  Quote
10-28-2011 09:19 PM  6 years agoPost 2
airdodger

rrElite Veteran

Johnston USA

My Posts: All  Forum  Topic

Heat it up.

Chris

PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2011 09:00 AM  6 years agoPost 3
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

It's normal,you probably are not pulling straight on rod ,use block of soft wood and a punch and tap out . If nothing wrong and don't need to do it leave and get more time out of it .

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2011 10:09 AM  6 years agoPost 4
yi0rgos

rrNovice

Limassol, Cyprus (Europe)

My Posts: All  Forum  Topic

Thank you guys

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 542 views POST REPLY
HomeAircraftHelicopterEngines Plugs Mufflers Fuel › OS 50SX- H Hyper Do I need a new Piston Pin?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, June 22 - 10:39 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online