RunRyder RC
WATCH
 1 page 981 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › 6003d motor help
10-28-2011 02:04 AM  7 years agoPost 1
Itogsawimpalad

rrNovice

Canada

My Posts: All  Forum  Topic

I have 4025-550 that was installed on my fusion 50, can i used that motor on 6003d set up, im using kontronik 80hv, 12s set up and 2x 3300 battery

PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2011 05:29 AM  7 years agoPost 2
dahld

rrKey Veteran

Bakersfield, CA, USA

My Posts: All  Forum  Topic

With the gearing of the Logo 600 (flying 3D type maneuvers), a "classic" set-up is a 560 kv motor on 10S, and 450-500kv motors on 12S.

You can use your 550 kv motor on 12S, but you will probably need to use the smallest pinion (11T for 6mm shaft motors, 10T if your motor has a 5mm shaft), and a fairly low throttle setting on your Jive (which Jive's handle quite well), and, you can't be looking for mild to low head speeds. The 550 kv motor on 12S will keep you at the upper end of the often accepted "standard" head speed for 3D flying, which is about 2200.

The 4025 was originally built for the Logo 600, but as the standard of power for our machines has gone up in the past few years, the 4025 is now considered a good Logo 500 motor...the 4035 now being more suited these days for 3D flying with the Logo 600.

Hope this info helps,

(-: Dave

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2011 08:08 AM  7 years agoPost 3
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

Good advice above, but honestly that will be far to steep for 12S, keep the kv range as Dave mentions above, proper gearing = happy times.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
11-04-2011 05:48 PM  7 years agoPost 4
g_dmitry

rrApprentice

Edmonton, AB, Canada

My Posts: All  Forum  Topic

530kv + 11T + 12S works good too for 2200 headspeed. Higher than 530 - is too much.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-04-2011 06:18 PM  7 years agoPost 5
KC

rrElite Veteran

WA

My Posts: All  Forum  Topic

I use the 4025-740 on 10s with mod 0.7 gears, 13t pinion.

I would use a mod 0.7 13 or 14t pinion with the 4025-550 on 12s

fwiw mod 0.7 gears are the original logo 600 gears, they work great with the 4025 motors.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 981 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › 6003d motor help
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, December 12 - 6:47 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online