RunRyder RC
WATCH
 1 page 626 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › tuning two Helis to match feel
10-17-2011 02:47 AM  6 years agoPost 1
ejhenris

rrNovice

Detroit, MI - USA

My Posts: All  Forum  Topic

I'm tryng to make a EVO Seadeu 50 have the same tail feel as my Ergo 50. Both have JR DS890G tail servo's and Futaba 240 gyro's. I can run 100% gain in the Ergo but only 55% gain in the EVO. I've heard if I trim down the tail blades on the EVO I can turn up the gain....Is this true?

I tried to shorten the servo horn slightly and it did nothing.

PM  EMAIL  Attn:RR  Quote
10-17-2011 07:13 AM  6 years agoPost 2
LaurenceGough

rrElite Veteran

UK

My Posts: All  Forum  Topic

I wouldn't trim tail blades - two models do not need the same tail gain to perform the same

PM  EMAIL  GALLERY  Attn:RR  Quote
10-17-2011 12:15 PM  6 years agoPost 3
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

You can get close but won't be exact . I've built two Raptor 50's exactly the same and still each hand own characteristics and some settings were different .

Don't worry about numbers , setup and test fly and get in flight to feel as close as you can .

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR  Quote
10-17-2011 01:16 PM  6 years agoPost 4
PBusch

rrKey Veteran

Minnesota

My Posts: All  Forum  Topic

I had two Vibe 50's set up the same but could never get them to fly the same.

PM  EMAIL  Attn:RR  Quote
10-17-2011 01:24 PM  6 years agoPost 5
Havoc

rrElite Veteran

Ky.

My Posts: All  Forum  Topic

You want lower electronic gain.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-17-2011 01:45 PM  6 years agoPost 6
MartyH

rrProfessor

USA

My Posts: All  Forum  Topic

You'll never get closer than just "close" no matter how hard you try. Even with two of the same airframes. You also have two entirely different helis. Why not set them up to exploit the best features of each instead of numbing one down to the lesser qualities of the other?

To answer your direct question. I would not trim the tail blades just to try to match the gain settings. Use whatever gain is necessary to make them feel similar.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-17-2011 03:49 PM  6 years agoPost 7
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

It could be that one heli has more vibration than the other, different mounting pads, different velcro strap tension, one helis tail mechanics might not run as smooth as the other which includes tail blade thrust bearings, different head speed, different tail gear ratios etc etc..

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 626 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › tuning two Helis to match feel
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Wednesday, September 19 - 2:01 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online