RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1367 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Futaba GY 611 slight drift
10-13-2011 07:10 PM  6 years agoPost 21
poerQwa

rrVeteran

Rotterdam, The Netherlands

My Posts: All  Forum  Topic

So in all honesty what does pro shop say about this?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-13-2011 10:06 PM  6 years agoPost 22
Jacoub

rrKey Veteran

Kuwait

My Posts: All  Forum  Topic

Actually they said it is super solid, and this is normal because the heli is moving in hover

PM  EMAIL  GALLERY  Attn:RR  Quote
10-13-2011 10:26 PM  6 years agoPost 23
Mike0251

rrVeteran

Hills of the Blue Ridge VA

My Posts: All  Forum  Topic

I use the 601 and 611 exclusively and have no issues. I have to ask you this, will your bird hover with no tail movement with the gyro off? Not in the wind and not pitch pumping either? In other words mechanically set perfect. If not then you need to adjust the tail pitch until you have the bird sitting still without the gyro on.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2011 02:35 AM  6 years agoPost 24
Jacoub

rrKey Veteran

Kuwait

My Posts: All  Forum  Topic

THis is a normal mode, yes with out HH it can flyes, and even with HH no tail movment, no wagging, nothing, as i said after around 10 second it drift to the right 1 or 2 degree, if it wasn't it will drifts countinusaly

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2011 02:43 AM  6 years agoPost 25
budz

rrApprentice

las vegas

My Posts: All  Forum  Topic

is it bound to a dx8?
what radio? all my helis bound to the dx8 did the same thing. i found out in the monitor screen that the rudder moves from zero to even -7 or +10 on it's own without any stick input. problem solved when i sent the tx for service

team solo

PM  EMAIL  GALLERY  Attn:RR  Quote
10-15-2011 01:42 PM  6 years agoPost 26
Jacoub

rrKey Veteran

Kuwait

My Posts: All  Forum  Topic

I am using JR Dsx 9, with 7 channel reciver 2.4 ght.
I have another reciver, but are you sure about it?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-15-2011 06:51 PM  6 years agoPost 27
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

The implied concern is the centering accuracy of the transmitter's rudder pot, not the receiver.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
10-16-2011 05:07 AM  6 years agoPost 28
Jacoub

rrKey Veteran

Kuwait

My Posts: All  Forum  Topic

Omg, i used this radio for my gas airplane, each flight my servo arm changed, but without any changing in sub trim or trims, might be the problem

PM  EMAIL  GALLERY  Attn:RR  Quote
10-16-2011 08:20 AM  6 years agoPost 29
poerQwa

rrVeteran

Rotterdam, The Netherlands

My Posts: All  Forum  Topic

Omg, i used this radio for my gas airplane, each flight my servo arm changed, but without any changing in sub trim or trims, might be the problem
Sounds you've got the problem at the b*lls.
Do you have a buddy with the same TX so you can try with a different TX(be sure to copy the model over )

PM  EMAIL  GALLERY  Attn:RR  Quote
10-16-2011 11:28 AM  6 years agoPost 30
Jacoub

rrKey Veteran

Kuwait

My Posts: All  Forum  Topic

Sorry what does this stand for (TX)?
Radio, and why?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-16-2011 09:43 PM  6 years agoPost 31
poerQwa

rrVeteran

Rotterdam, The Netherlands

My Posts: All  Forum  Topic

Tx = transmitter
Rx = receiver

Why? The T and R are clear but the x is unclear for me too but are commonly used to indicate transmitter or receiver

PM  EMAIL  GALLERY  Attn:RR  Quote
10-17-2011 12:51 AM  6 years agoPost 32
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

At least in North America, an "x" is often used as an abbreviation for the implied/known remainder of a word. Another example would be "Xmas" for Christmas.

End of lesson, back to topic.....

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
10-17-2011 10:15 PM  6 years agoPost 33
Jacoub

rrKey Veteran

Kuwait

My Posts: All  Forum  Topic

Loooool, thanks all, x is unkown maybe, but back to topic, nothing wrong with my radio, the problem was with my servo arm gears for my gas airplane. I did change my mecanical adjustment for my heli, and it seems to be ok with 90 degree rotation as dr ben said, it helps actually, but I ve chenged the gear ratio, there was low head speed with 13T pionion. So I am very happy with 170T/14T for 6s lipo. Again the drifts its only when i hover it over 5 second at least. It isn't a big deal, my next setup is cooming soon FBL

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1367 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Futaba GY 611 slight drift
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, July 23 - 10:13 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online