RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 872 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › Logo400SE with Mod 0.7 gears
08-05-2011 07:29 PM  6 years agoPost 1
ehaga

rrApprentice

Bærum, Norway

My Posts: All  Forum  Topic

Hi,

I have converted my Logo400SE to mod 0.7 gears, but I have some problems with vibrations. In the standard kit there are to washers to Drive Pulley Main Gear. When converting to 0.7 the gear dont line up with the main gear, and to me it looks like I have to do something with this washers.

The Drive Pulley Main Gear is about 1mm higher then the main gear.

What did you do ??

Regards

- Erik -

PM  EMAIL  GALLERY  Attn:RR  Quote
08-05-2011 08:13 PM  6 years agoPost 2
MrNiceGuy

rrVeteran

Melbourne, FL

My Posts: All  Forum  Topic

I have used shims to make the gears the same height. Make sure you aren't too tight on the mesh and that the tail gear is not at an angle compared to the main gear or you can get vibes. Mine runs smoothly so should yours too when set correctly.

Yesterday is History, Tomorrow is a Mystery, Today is a GIFT

PM  EMAIL  GALLERY  Attn:RR  Quote
08-06-2011 02:42 PM  6 years agoPost 3
garyinbg

rrNovice

Bulgaria

My Posts: All  Forum  Topic

Nice mod guys
Do you have any images please to see what you have one.

Sounds really ideal for some of the stronger motors.

Thanks in anticipation.

Gary

Esprit Model Flight Team

PM  EMAIL  Attn:RR  Quote
08-06-2011 03:03 PM  6 years agoPost 4
llbr22

rrApprentice

Oakland, CA

My Posts: All  Forum  Topic

PM  EMAIL  Attn:RR  Quote
08-09-2011 10:56 AM  6 years agoPost 5
4ever

rrApprentice

Austria

My Posts: All  Forum  Topic

Hi, Erik,

put both washers on the upper side!

I didn't like the Mod. 0,7 gearing too because of unsmooth running and too much noise!

If you are using a ~1000KV Motor wit 22 or 23T pinion there is no need to convert to Mod 0,7 only when using >1400KV motors with small pionions the modifivation is necessary!

On the 22-23T pinion are enough teeth touching each other to manage the torque! I am flying with 500mm blades and bursts of 2700W with no Problem!

So long
Martin

PM  EMAIL  GALLERY  Attn:RR  Quote
08-16-2011 08:07 PM  6 years agoPost 6
marcosp

rrApprentice

Buenos Aires, Argentina

My Posts: All  Forum  Topic

Really glad to hear this. Is that with Gov? On what ESC?

PM  EMAIL  GALLERY  Attn:RR  Quote
08-17-2011 05:29 AM  6 years agoPost 7
4ever

rrApprentice

Austria

My Posts: All  Forum  Topic

At the moment I am using a JIVE 60+HV which holds the 2,4-2,7KW peaks without shutting down

Converting this week to V-Bar governor with a Robbe Roxxy 9100-6 ESC and Hyperion phase sensor.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 872 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › Logo400SE with Mod 0.7 gears
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Saturday, June 23 - 9:39 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online