RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1822 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsV-Bar › How do I prepare my T8FG for bank switching off gyro channel 5?
08-05-2011 07:26 PM  6 years agoPost 1
Rogman88

rrElite Veteran

West Monroe, LA

My Posts: All  Forum  Topic

Setup. T8FG, mini-vbar, 450 pro and R6203SB reciever using Sbus. I've got the vbar bank switch on channel 5 in 5.1 setup menu (which is gyro channel). It apparently defaults to the condition switch from normal to idleup on the transmitter because I see the bank switch bar change when I flip from one to the other (because gyro is going from rate to AVCS modes). I'd like to set the bank switch to be the SA swtich on the transmitter but am having a tough time trying to go through the function, condition, and gyro menus to get it set up.

I've not used banks to this point on my Logo 600 (tail was rock solid using MrMels suggestions) but it may speed up finding tail gyro gains that I would prefer for this new 450.

Thanks!

Roger

High Voltage just works better

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-05-2011 11:57 PM  6 years agoPost 2
g-bru

rrNovice

United Kingdom

My Posts: All  Forum  Topic

Ok, you are almost there.

Set up all your flight conditions to there respective switches, this is done in the Conditions menu.

To assign your Gyro to the SA Switch, simply go to Gyro Menu and change the "COND" selection to "SW" which will give you the option to select a switch. Still in the Gyro menu "No.1" set to "ON" and assign to "SA" switch and make sure you change the 3 position switch (SA switch) to first position. Then change condition of switch On, Off, Off. Set AVCS to "Norm" and make the percentage 0% which will give you Bank 0.

You repeat this process again except this time round still in the Gyro Menu you will select "No.2" set to "ON" and assign to "SA" switch and set switch to middle position (2nd postion). Now change condition of switch to Off, On, Off. Once again set AVCS to "Norm" and make the percentage 40% which will give you Bank 1.

Rinse and repeat for bank 3 etc etc.

I personally like to use Banks for my 4 Flight Conditions, so I have my banks set up to my Flight Condition switches.

Hope this helps.

G.

TDR 3DRigid (Mikado V-Bar 5.1)
Futaba 8FG (S-Bus)

PM  EMAIL  Attn:RR  Quote
11-17-2014 03:25 PM  3 years agoPost 3
whiskey29

rrNovice

Samarinda

My Posts: All  Forum  Topic

Hi g-Bru,
I know this is old post, but really helpfull.
Its better than assigning a switch in the function menu.
This way is a lot better, we can use all banks and have hold with different bank.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1822 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsV-Bar › How do I prepare my T8FG for bank switching off gyro channel 5?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, June 24 - 9:55 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online