RunRyder RC
WATCH
 1 page 1894 views POST REPLY
HomeClassifiedAircraftHelicopterClassifieds - Fuel Helicopters Sold  $450 Compass Knight 3D Heli+ 3 Air frames and the parts MOTHERLOAD
07-08-2011 06:06 AM  7 years agoPost 1
what_the_helli

rrKey Veteran

cookeville, tn USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

2-14-2015
This is an old ad that I have updated.
All this stuff is still here sitting in my house.
I want it gone.....

$450+Shipping
I keep servos and receiver

$550+Shipping gets it all!

K3d complete Heli
This is a beater! I've had plenty of crashes with it
Frame are cracked and have been repaired.
I'm sure bearings need replaced in places
If you want a nice heli GO THROUGH IT
But it does fly and if you need a beater its great.
1 new white canopy and a bunch of cracked ones could reglassed though
JR8311 servos x3
821 on the throttle
futaba 9254 an 401 gyro on the tail
Fromeco regulator
The 2s lipo maybe bad by now
Hyper 50
Fun Key Mains and KBDD tail & paddle
JR921 dsm2 receiver

Radio south pro driver III
six nib os 8 glowplugs

Airframe #1 + add on's
81.83 Tail Gear Box (metal)
59.95 Kasama Tail Grips

Airframe #2 + add on's
40.56 Tail servo relocation kit
70.92 Spindle conversion 8mm (on the flybarhead)
200.00 K3D flybarless head--old style

Airframe #3 NIB Knight 6S
Uses tons of the 3D parts
Motor only, the esc got used on another project

ALL of these parts are new in the package

6.66 02-0105h Dampener 85 Hardness x3ea 2.22
1.65 02-0110 Spindle Washer (3D)
26.13 02-0113 Spindle Shaft - 8mm x3ea 8.71
1.65 02-0118 Flybar Support Collar
17.04 02-0205s Tail Blade Links for Odin and Knight x4ea 4.26
37.17 02-0209 Tail Rotor Hub for Odin and Knight x7ea 5.54
30.54 02-0214 Tail Shaft x6ea 5.09
17.04 02-0262s Tail Rotor Pulley x4ea 4.26
43.47 02-0263z Tail Case with Ball Bearing and Bolts x3ea 14.49
27.78 02-0264ab Tail Blade Holder for Odin and Knight x3ea 9.26
11.78 02-0304 Cooling Fan x2ea 5.89
6.55 02-0305 Cooling Fan Shroud
3.99 02-0310f Clutch bell washer
6.36 02-0311 Engine Mount Dampeners x2ea 3.18
5.30 02-0312 Clutch Liner x5ea 1.06
8.60 02-0317s Starter Shaft with E-Clip (Knight) x5ea 1.72
37.80 02-0321z Clutch Bell with Ball Bearing and Liner x2ea 18.90
21.26 02-0323z Clutch with One Way Bearing and Bolts
6.36 02-0334y Crank Case Dampener (YS) x2ea 3.18
3.18 02-0334 Crank Case Dampener (OS)
22.18 02-0507 Mixing Arm Set x2ea 11.09
56.36 02-0519s Phasing Control Ring x4ea 14.09
40.08 02-0536z Flybar Support with Ball Bearing (Aluminum)
5.91 02-0543 Flybar
29.50 02-0605z Bearing Block with Ball Bearing x2ea 14.75
12.78 02-0701 Stainless Link Balls x2ea 6.39
5.31 02-0709 Ball Links
25.56 02-0809 Landing Gear Mount (Plastic) x4ea 6.39
16.98 02-0812 Bottom Frame Stiffener x2ea 8.49
29.80 02-0817 Radio Tray x4ea 7.45
32.75 02-0819 skid Struts x5ea 6.55
6.80 02-0823ab Tail Boom Support Clamp x2ea 3.40
24.60 02-0826 Tail Boom x3ea 8.20
5.31 02-0827 Tank Mount
27.32 02-0841 Tail Boom Brace x4ea 6.83
14.86 02-0841s Canopy Standoff Set (3D)
6.39 02-0845s Frame Member
9.54 02-0846 Tank Dampener x3ea 3.18
4.03 02-0853 Canopy Dampner
1.61 02-0918 Servo Nuts
38.22 02-1102 Main Blade Holder Set 6mm x3ea 12.74
29.72 02-1103 Main Blade Holder Set 8mm x2ea 14.86
24.60 02-1816 Tail Fin x5ea 4.92
14.10 02-1825s Tail Boom Mount with Bolts x2ea 7.05
4.26 02-1843 Gyro Tray (Plastic)
81.80 02-3601 Main Gear (Machined) x5ea 16.36
11.27 02-5006 Fuel Tank Assembly
16.98 07-4501 Main Pulley x2ea 8.49
7.62 40-2660 Tail Control Rod x2ea 3.81
3.59 60-5134 Ball bearing 5x13x4
7.78 60-6124 Ball Bearing 6X12X4 x2ea 3.98
23.88 60-6155 Ball bearing 6x15x5 x6ea 3.98
4.31 60-6196 Ball bearing 6x19x6
16.62 60-8165 Ball Bearing 8x16x5 x3ea 5.54
14.76 60-8196 Ball bearing 8x19x6 x4ea 3.69
19.14 60-10195 Ball bearing 10x19x5 x2ea 9.57
12.32 60-12215 Ball bearing 12x21x5 x2ea 6.16
7.42 62-0612 One way bearing 6x10x12
14.84 62-121816 One way bearing 12x18x16 x2ea 7.42
7.77 63-4094 Thrust bearing 4x9x4
17.40 63-8165 Thrust bearing 8x16x5 x2ea 8.70
8.86 82-821003 Washer 8.2x10x0.3 8mm spindle x2ea 4.43
49.74 98-1800b Tail Belt 3M1800 x3ea 16.58
33.45 e-lg-02 Linkage Rod x5ea 6.69
50.00 Crash Kit x2ea 25.00

Total $1218.43

these are new parts not in package and used parts.
It is possible some used parts listed as "good" may not be....they are used! also pricing maybe off here as this list has not been updated in 2 yrs

27.32 Skids x4ea 6.83.......new/good
17.29 tail belt........new
39.44 clutch bell x2 ea.19.72.......good
22.16 clutch....good
17.93 Autorotation Hub......good
41.80 Flybar Support with Ball Bearing (Aluminum).....good
0.00 Flybar Support with Ball Bearing (Aluminum)...slightly bent, can be straightened
5.45 Flybar Collar........good
34.12 Cooling Fan Hub.............x2ea 17.06 both used (both good but marred from pliers)
15.45 Flybar Control Arm with Set Screw
23.12 Mixing Arm Set x2ea 11.56.......1 good, 1 new
49.02 Rotor Hub with Yoke (Metal)......good
7.76 I-Lever with Ball Bearing (Aluminum).....good
49.94 Spindle Shaft - 8mm x11ea 4.54..new
25.49 Landing Gear Mount (Aluminum) ....good
62.05 Frame reinforcers (Aluminum)........good
70.92 Spindle conversion 8mm
49.02 Rotor Hub with Yoke (Metal) with
41.80 Flybar Support with Ball Bearing (Aluminum) and
11.56 Mixing Arm Set.......complete assembly very good
17.16 Paddle Set x2ea 8.58........new
19.94 3D Paddle Set x2ea 9.97.....new
10.00 thunder tiger ultra light red paddles....like new
7.98 Main Shaft (3D)........new
11.08 Frame Stiffener x2ea 5.54........good
5.12 Tail Fin (doubled-super strong)......good
0.0 Tail Fin........cracked, could be used as is or repaired
6.65 Frame Member.......new
15.51 Main Blade Holder Set 8mm........new w/ bearings
13.30 Main Blade Holder Set 6mm......new
34.13 Main Blade Holder Set with Ball Bearing (6mm)..........very good
8.86 Gyro Tray (Plastic) x2ea 4.43.......good
27.93 Autorotation Sleeve x3ea 9.31......good
21.95 Horizontal Fin (Carbon)........new
7.72 Tail Boom Brace Connectors with Bolts x2 ea 3.86.....new
46.09 Autorotation Hub w/ One Way, Sleeve, Main Pulley Hub, Main Pulley gear (new).....very good
45.33 Tail Case (Plastic) with Ball Bearing and Bolts x3ea 15.11........all new
28.50 Tail Pitch Plate Assembly (Plastic)......new (on one tail case)
23.20 Washout Base.....new
19.95 Tail Boom Servo Mount x3 ea 6.65.........2 new, 1 very good
6.65 Landing Gear Mount (Plastic)........good
8.86 Tail Control Rod Guide Clamp set x2ea 4.43.......new
22.16 Delrin Dampener - 8mm......good
32.88 Tail Pitch Lever Set x2ea 16.44........1 used, 1 new
9.66 Tail Blade Holder set.....new
15.51 Canopy Standoff Set..new

total over $1000

I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com

PM  EMAIL  GALLERY  Attn:RR  Quote
07-09-2011 09:47 PM  7 years agoPost 2
what_the_helli

rrKey Veteran

cookeville, tn USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

ttt

I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com

PM  EMAIL  GALLERY  Attn:RR  Quote
07-14-2011 10:32 PM  7 years agoPost 3
what_the_helli

rrKey Veteran

cookeville, tn USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

TTT

I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com

PM  EMAIL  GALLERY  Attn:RR  Quote
08-29-2011 01:27 AM  7 years agoPost 4
what_the_helli

rrKey Veteran

cookeville, tn USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

TTT

I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com

PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2015 03:21 AM  3 years agoPost 5
what_the_helli

rrKey Veteran

cookeville, tn USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

2-14-2015
This is an old ad that I have updated.
All this stuff is still here sitting in my house.
I want it gone....

$650+shipping gets it all!!

I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1894 views POST REPLY
HomeClassifiedAircraftHelicopterClassifieds - Fuel Helicopters Sold  $450 Compass Knight 3D Heli+ 3 Air frames and the parts MOTHERLOAD
02-20-2015 12:36 AM  3 years ago •• Post 6 ••
what_the_helli

rrKey Veteran

cookeville, tn USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Price reduced
If its nitro and I find it, it goes in the box!

$500+Shipping and I keep servos and receiver
$600+Shipping gets it all!

crashed and over heated hyper 50
Case is good
Carb is good
Head could be reused

Engine tools for 30,50, and 90

I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com

PM  EMAIL  GALLERY  Attn:RR  Quote
02-24-2015 12:54 AM  3 years agoPost 7
what_the_helli

rrKey Veteran

cookeville, tn USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Price reduced

$450+Shipping and I keep servos and receiver
$550+Shipping gets it all!

I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com

PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2015 05:50 PM  3 years agoPost 8
what_the_helli

rrKey Veteran

cookeville, tn USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

TTT

I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1894 views POST REPLY
HomeClassifiedAircraftHelicopterClassifieds - Fuel Helicopters Sold  $450 Compass Knight 3D Heli+ 3 Air frames and the parts MOTHERLOAD
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Friday, December 14 - 1:25 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online