RunRyder RC
 53  Topic Subscribe
WATCH
 26 pages [ <<    <     12      13     ( 14 )     15      16     NEXT    >> ] 51508 views TOPIC CLOSED
HomeAircraftHelicopter
e-
Align
T-REX 600 › TREX 600EFL PRO OFFICIAL THREAD 1
08-04-2011 08:42 AM  6 years agoPost 261
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

Also I found that just using tx doesent change to helicopter mode , I setup via tx multiple times and then pluged into link and still in airplane mode .

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR
08-05-2011 03:50 PM  6 years agoPost 262
patrik_heli

rrNovice

sweden

My Posts: All  Forum  Topic

does the scorpion 4035-500kv fit inplace or will it hit the align servos
?

PM  EMAIL  Attn:RR
08-05-2011 04:40 PM  6 years agoPost 263
504Rone

rrKey Veteran

New Orleans, LA.

My Posts: All  Forum  Topic

Is the boom clamp on the 600pro the same as the 600n?

NO FLYBARS

PM  EMAIL  GALLERY  Attn:RR
08-05-2011 05:20 PM  6 years agoPost 264
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

Yes

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR
08-05-2011 06:13 PM  6 years agoPost 265
OnTheSnap

rrApprentice

Santa Clara, Ca

My Posts: All  Forum  Topic

The 4035-500 fits. But I had to add a couple washers on the servo to increase their angle slightly. I found the power to be very close to the stock motor.

The boom clamp is the same size, but I 'think' the pro comes with an updated metal version compared to the 600N.

MSH USA -- Cyclone -- Jeti -- Xnova

PM  EMAIL  GALLERY  Attn:RR
08-05-2011 08:08 PM  6 years agoPost 266
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

I'm ok with power being the same but what about temps ?

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR
08-05-2011 08:11 PM  6 years agoPost 267
504Rone

rrKey Veteran

New Orleans, LA.

My Posts: All  Forum  Topic

Thanks,I meant tail boom case.

NO FLYBARS

PM  EMAIL  GALLERY  Attn:RR
08-05-2011 08:37 PM  6 years agoPost 268
patrik_heli

rrNovice

sweden

My Posts: All  Forum  Topic

yeh stock engine would be great if i could get my replacement engine soon it flamed out after 3min even though the logg showed it wasnt even close to max the amps or anything so got promissed a replacement engine but yesterday i got the answere that align dont have any in stock to send to the supplier strange since i been waiting for 5 weeks now

PM  EMAIL  Attn:RR
08-05-2011 10:59 PM  6 years agoPost 269
OnTheSnap

rrApprentice

Santa Clara, Ca

My Posts: All  Forum  Topic

4035-500 definitely runs cooler. The 600MX ran very hot for me. No official temps though, sorry.

MSH USA -- Cyclone -- Jeti -- Xnova

PM  EMAIL  GALLERY  Attn:RR
08-06-2011 05:55 AM  6 years agoPost 270
ragtop

rrVeteran

salt lake city, utah, usa

My Posts: All  Forum  Topic

my mx got a blazing 158 last weekend. it was a pretty hot day and i was working it pretty good though. i think it has some thing to do with the canopy covering it. so i trimmed it so it was exposed like the 700e.

PM  EMAIL  GALLERY  Attn:RR
08-09-2011 01:41 AM  6 years agoPost 271
kenstick

rrNovice

Fl

My Posts: All  Forum  Topic

align 600
blades was causing rocking back and fourth.

PM  EMAIL  GALLERY  Attn:RR
08-09-2011 02:03 AM  6 years agoPost 272
Manuelbar

rrApprentice

Seattle, US

My Posts: All  Forum  Topic

kenstick:

Maybe misaligned paddles or paddles with different weight? Or flybar not centered?

PM  EMAIL  Attn:RR
08-09-2011 09:43 AM  6 years agoPost 273
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

If cg is off you start a rebound in head , but as posted something is out of alignment . If it does it at low headspeed this is common ,try taking out the spindle sleve .

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR
08-10-2011 02:45 AM  6 years agoPost 274
ncarbon

rrApprentice

Kalispell Montana

My Posts: All  Forum  Topic

Still enjoying.....
This heli is a total enjoyment to fly......I am really pleased with the 3GX.....the longer I own it, the more i want to fly it.

Ned

PM  EMAIL  GALLERY  Attn:RR
08-10-2011 02:54 AM  6 years agoPost 275
OLROY

rrKey Veteran

Wichita Ks

My Posts: All  Forum  Topic

Good looking bird

PM  EMAIL  GALLERY  Attn:RR
08-10-2011 04:11 PM  6 years agoPost 276
PC12DRVR

rrKey Veteran

USA

My Posts: All  Forum  Topic

Are you guys able to get +12-12 pitch and 11 degrees cyclic without binding? I had to switch to the shorter balls and move out on the servo arms and I can barely get these numbers without the servo arm ball links rubbing the servo case in the extreme forward elevator and full down collective?? 9 Degrees on the cyclic worked fine but the roll rate was too slow for my liking.

PM  EMAIL  GALLERY  Attn:RR
08-10-2011 08:31 PM  6 years agoPost 277
kenstick

rrNovice

Fl

My Posts: All  Forum  Topic

Good luck I could never get it eather but if you run 3000 head spead you only need 5 degrees LOL joke relax. Ok I converted a 600 esp and used align 600mx 12s and a 700 115 main gear with 700 12 pinion and it flies perfect and I use the new oneway that comes with the pro just added a 700 main gear. I get 6 min plus with mild 3d and sport flying it is my best heli now and my frames are FRP g10 only 33 bucks and use a 3rd main bearing block...and one more thing I use a 550 tailservo mount in the frame and the rudder wire that comes with the nitro boom.The length is perfect just had to drill 4 holes in the frame and I have a extra frame for a templet. I run a life pack and HV servos no step down or nothing.It is very fast heli and the power is Awsome.

PM  EMAIL  GALLERY  Attn:RR
08-10-2011 09:28 PM  6 years agoPost 278
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

What head speed is everyone running ? Im at 2200 in mode 2 and heli flys fine with 6 min med to hard 3d flights with volts 3700 35c packs.

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR
08-10-2011 09:51 PM  6 years agoPost 279
Rob P77

rrApprentice

Middletown, DE USA

My Posts: All  Forum  Topic

2400 with no tail issues. I only get 4 minutes flying hard 3d but can get 5 to 5 1/2 if being easy on it. I am running the voltz 12s stick pack 3700 35C

The man who never took a chance, never stood a chance

PM  EMAIL  GALLERY  Attn:RR
08-11-2011 03:17 AM  6 years agoPost 280
Manuelbar

rrApprentice

Seattle, US

My Posts: All  Forum  Topic

I Just finished my bird. I like to use a lot of negative exponential in my futaba radio for aileron and elevator. As I am using the 3GX, it seems that negative exponential in the radio has no effect. Anybody know what I should change in the 3GX software interface? The heli seems tweechy with any stick movement.

Thanks!

PM  EMAIL  Attn:RR
WATCH
 26 pages [ <<    <     12      13     ( 14 )     15      16     NEXT    >> ] 51508 views TOPIC CLOSED
HomeAircraftHelicopter
e-
Align
T-REX 600 › TREX 600EFL PRO OFFICIAL THREAD 1
 Print TOPIC  Make Suggestion 

 53  Topic Subscribe

Saturday, June 23 - 9:04 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online