RunRyder RC
WATCH
 1 page 809 views POST REPLY
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Mystery drive part, need help to identify?
06-05-2011 05:13 AM  8 years ago
Topic Vote0Post 1
ssrobzoom

rrKey Veteran

Tn

MyPosts All Forum Topic
💎Sustaining Member
Mystery drive part, need help to identify?
I bought an Avant Aurora Heli used and this is a mystery part that was installed. I don’t know where it came from or from what brand. I do know it's not part of the brand I purchased.

Who makes this and for what heli?

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2011 05:47 AM  8 years ago
David Blain

rrKey Veteran

Mt. Dora, Florida (USA)

MyPosts All Forum Topic
ssrobzoom-
What Make, Model, Size is this helicopter the "Mystery" part is on?
Additional information will help buddy!
David Blain
T.O.R.C.H.S. Orlando Member
SHARE  PM  EMAIL  Attn:RR  Quote
06-05-2011 07:47 AM  8 years ago
Paul Woodcock

rrElite Veteran

Dubai - United Arab Emirates

MyPosts All Forum Topic
Hi

The pictures are not too clear.

Could it be a Hirobo Eagle/Freya torque tube drive.....

http://www.ronlund.com/mm5/merchant...ory_Code=HIR_FR

Regards
Paul
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2011 08:00 AM  8 years ago
gotnoclue

rrApprentice

sydney

MyPosts All Forum Topic
is it a hyper drive coupling off a synergy N9?

as said model and size of heli in question will probably help
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2011 08:54 AM  8 years ago
Taipan

rrElite Veteran - Sydney, Australia - MyPosts All  Forum  Topic

It's from the Kasama Srimok 90N/E.

Either KSM10-TS18 Tail drive joint, Rear ALU silver (5mm shaft) or KSM10-TS19 Tail drive joint, Front ALU silver(6mm shaft.)

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2011 01:19 PM  8 years ago
ssrobzoom

rrKey Veteran

Tn

MyPosts All Forum Topic
💎Sustaining Member
I purchased a used Aurora and found this on both ends of where the torque tube seats.

Wonder why the previous owner installed these on it?

The tail drive side and on the input shaft to the tail shaft.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2011 03:34 PM  8 years ago
fflier9

rrApprentice

Wauwatosa, WI USA

MyPosts All Forum Topic
ask him.Compass 6HV vbar, Compass 600E 12s, MSH Protos 500 BeastX
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2011 05:56 PM  8 years ago
ssrobzoom

rrKey Veteran

Tn

MyPosts All Forum Topic
💎Sustaining Member
I don't remember who I purchased it from here on RR
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2011 10:26 PM  8 years ago
gotnoclue

rrApprentice

sydney

MyPosts All Forum Topic
Did it have the stock torque tube in it? What about the ends of the torque tube?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2011 11:26 PM  8 years ago
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

MyPosts All Forum Topic
Possible that original parts were not available and Used what would work . Not a bad thing but one reason I buy new .I stole it ,flew it and gave it back ;)
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-06-2011 01:00 AM  8 years ago
ssrobzoom

rrKey Veteran

Tn

MyPosts All Forum Topic
💎Sustaining Member
The orginial torque tube was shorten to allow room for the addition length that the adapters caused.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-06-2011 07:33 AM  8 years ago
Taipan

rrElite Veteran

Sydney, Australia

MyPosts All Forum Topic
You're welcome mate.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-06-2011 03:14 PM  8 years ago
ssrobzoom

rrKey Veteran

Tn

MyPosts All Forum Topic
💎Sustaining Member
Thanks for all who helped!!

I found who I purchased the Aurora from:

https://rc.runryder.com/rr/pm.htm?show=9398451

I talked with the previous owner and he says the Kasama Tail Drive
centers the Aurora torque tube better than the stock setup.

http://helidirect.com/kasama-tail-d...0ne-p-15148.hdx
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 809 views POST REPLY
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Mystery drive part, need help to identify?
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Wednesday, May 27 - 9:47 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online