RunRyder RC
WATCH
 1 page 1027 views POST REPLY
06-04-2011 08:03 AM  9 years ago
Topic Vote0Post 1
crashagain

rrApprentice

Redding

MyPosts All Forum Topic
I made my V2 FBL.
I got bored with all the rain and did some messing around and figured out it was not that hard to use existing parts and make my Frenzy FBL. I had a Skookum sitting around and decided to use it. Got the programing done last week and took her out and did the fine tuning last weekend. All I can say is WOW. It flew great before but now it flys Awsome.

The balls on the blade grips are the balls from the rudder linkage under the boom.
I used the mixer arms from the old setup and cut off the long side and just used the short one with the little angle thingys on them. For the swash follower collar I used a collar clamp from my Velocity 50 http://www.amainhobbies.com/product...Base-w-Hardware

The linkages for the blade grips are the ones that were already on the head, I just adjusted them till I was 0deg at center stick, no other mods needed.
Velocity 50 FBL, Trex 600 FBL, Frenzy V2 FBL
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2011 05:28 PM  9 years ago
wifeorheli

rrElite Veteran

reno, nevada usa

MyPosts All Forum Topic
great conversion looks good
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1027 views POST REPLY
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, June 4 - 4:43 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online