RunRyder RC
WATCH
 9 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ] 15489 views TOPIC CLOSED
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsFutaba CGY › Futaba CGY750 v1.10 Released!
05-31-2011 09:47 PM  9 years ago
Fabrice

rrNovice

Arras, France

MyPosts All Forum Topic
Update Ok
very nice

Thank you

Fabrice
Sceadu Evo 50 - SDX 55 - T14SG V2.02 - CGY 750 www.fabricedelhay.fr
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR
05-31-2011 09:49 PM  9 years ago
spurdy

rrNovice

united kingdom

MyPosts All Forum Topic
@Bkervaski
thanks for the info
updating now
SHARE  PM  EMAIL  Attn:RR
05-31-2011 09:54 PM  9 years ago
Wyorcflyer

rrVeteran

Cheyenne, Wyoming USA

MyPosts All Forum Topic
can i just power up the unit as normal but without the tx, as i have no spare batt and power up through my reciever regulator ?
It depends out how you are getting power to the CGY750. If you are getting power to the CGY750 through the SBus cable then you have to go to plan B. The CIU-2 has to hook up to the S.Bus slot on the CGY750. If that was how you were getting power to the CGY750 they you will need to pull a wire from another port, but not the rpm sensor port, to provide power.

Jack
SHARE  PM  EMAIL  GALLERY  Attn:RR
05-31-2011 10:54 PM  9 years ago
Kevin Dalrymple

rrKey Veteran

Indianapolis

MyPosts All Forum Topic
Wow that was easy. I wish the 520 hook up was that easy. Good job Futaba!
SHARE  PM  EMAIL  GALLERY  Attn:RR
05-31-2011 11:51 PM  9 years ago
npap

rrApprentice

Toulouse - FRANCE

MyPosts All Forum Topic
Great updates, very easy to do...well done Futaba..

I have a question for Rcstacy:
Enter the head speed in governor section even if you aren't using it.

Turn PhaseEqu on
Why? if you aren't using it, especially in E heli with governor mode on ESC. Do you put throttle ESC wire on Rx or on THR/E2 input on CGY750? I connect my throttle wire on Rx, not on CGY750. I don't use governor mode on my T8FG, just some throttle flat curve, may be I don't use it on the right way.

Could you explain us what PhaseEqu do?

Thanks for your help

Norbert
Agile 7.2 European Factory team - Scorpion - MKS
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 12:10 AM  9 years ago
Ben-T-Spindle

rrProfessor

Central Illinois

MyPosts All Forum Topic
Do I need to install a driver or something to get the CIU-2 to work?... BTS
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 12:22 AM  9 years ago
Wyorcflyer

rrVeteran

Cheyenne, Wyoming USA

MyPosts All Forum Topic
Do I need to install a driver or something to get the CIU-2 to work?
Yes.

http://www.futaba-rc.com/software-updates.html

Per my post above this was the hard part for me because of Vista. If you have Vista you have to wait for it to give up before you can do it manually as the instructions expect and require.

Jack
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 01:00 AM  9 years ago
skew

rrVeteran

KY

MyPosts All Forum Topic
Just flew my 600E WOW just like the video. Looks like it just cost me another $300
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 01:09 AM  9 years ago
GetToDaChopper

rrElite Veteran

Las Vegas , NV

MyPosts All Forum Topic
Just flew my 600E WOW just like the video. Looks like it just cost me another $300
i don't understand, what cost you $300 ?
    ▲
  ▲ ▲
▲ ▲ ▲ One of a Kind !!!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
06-01-2011 01:13 AM  9 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
💎Sustaining Member
Quote
Just flew my 600E WOW just like the video. Looks like it just cost me another $300

i don't understand, what cost you $300 ?
He's probably saying he is going to buy another one now.

I just tried the update on my Windows 7 computer, and it froze up about 1/4 of the way through and killed the 750 (just a little after the message saying it was erasing the firmware). It wouldn't power up, wouldn't do a thing. However, It would respond by pressing the mode + to give me more tries at updating it. Tried 2 more times on the Win 7 machine with identical results.

Pulled out my Mac that has XP running in Parallels, and it zipped right through the update and works now. So, if you have an XP computer you can use, you may want to consider just doing it on there.

I'll try to get it installed tomorrow in my Furion so I can try flying it in the afternoon. If I like it, I'll sell the vbar that is currently in the there. If not, it'll go back in the classifieds.
Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 01:15 AM  9 years ago
skew

rrVeteran

KY

MyPosts All Forum Topic
GetToDaCopper, Well $269 after coupon buying another cgy750 for one of my other helis.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 01:21 AM  9 years ago
GetToDaChopper

rrElite Veteran

Las Vegas , NV

MyPosts All Forum Topic
awwww i get it now.....

Eury do you think its a windows 7 issue or maybe something hardware related with your computer ?

if you think it's windows 7 you might try running the update with a right click "run as administrator" and see if that does the trick ?
    ▲
  ▲ ▲
▲ ▲ ▲ One of a Kind !!!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
06-01-2011 01:23 AM  9 years ago
aj23dsm

rrNovice

kirkland WA

MyPosts All Forum Topic
Is the server down? cannot get it to download on my computer..
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 01:33 AM  9 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
💎Sustaining Member
I don't know, I just know that it didn't work on my Win 7 Pro box. The first time I ran it as an admin, the second I didn't, the third I did. All with the same results.

I keep that computer around mostly for programming things and doing updates, that's the first time it's ever failed anything like that.
Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 01:36 AM  9 years ago
GetToDaChopper

rrElite Veteran

Las Vegas , NV

MyPosts All Forum Topic
and to think they made computers to make are lifes easier, lol dang computers

computers, they won't let you down, you just have to own several of them !
    ▲
  ▲ ▲
▲ ▲ ▲ One of a Kind !!!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
06-01-2011 01:37 AM  9 years ago
skew

rrVeteran

KY

MyPosts All Forum Topic
I used win 7 32 bit right clicked on exe and ran as administraitor worked with no issues
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 01:42 AM  9 years ago
Dr.Ben

rrMaster

Richmond, VA, USA

MyPosts All Forum Topic
Yeah, something's weird. I executed two prerelease beta firmware updates with no issues on a Windows 7 machine.

Eury, if you keep having problems, PM SKaluf. He'll help you figure it out.

Ben
Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 01:42 AM  9 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
💎Sustaining Member
Dunno, mine is 64bit. Doesn't matter, I had the Mac to do it on, but wanted to give people a heads up just in case.Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-01-2011 01:42 AM  9 years ago
GetToDaChopper

rrElite Veteran

Las Vegas , NV

MyPosts All Forum Topic
hmmmm might be some funky hardware related bug of some sort or maybe something with 64 bits ? i know some 32 bit drivers aren't compatable with 64 bit OS's ?

Eury did you have any prob's getting the CIU-2 setup on your computer like Wyorcflyer did with windows vista ?
    ▲
  ▲ ▲
▲ ▲ ▲ One of a Kind !!!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
06-01-2011 03:03 AM  9 years ago
bkervaski

rrElite Veteran

Birmingham, AL, USA

MyPosts All Forum Topic
First flights = awesome!!!

If the status bar freezes just be patient and wait it will finish normally.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 9 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ] 15489 views TOPIC CLOSED
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsFutaba CGY › Futaba CGY750 v1.10 Released!
 Print TOPIC  Make Suggestion 

 33  Topic Subscribe

Monday, June 1 - 12:04 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online