RunRyder RC
WATCH
 1 page 691 views POST REPLY
Home✈️Aircraft🚁Helicoptere-Elec-Helicopters New or Limited ActivityNext-D › Forward tail bevel gears....
05-31-2011 04:39 PM  8 years ago
Topic Vote0Post 1
jsenicka

rrProfessor

Eagle River, WI

MyPosts All Forum Topic
Forward tail bevel gears....
Any tips on setting ideal mesh?
I managed to completely detoothify my forward bevel gears yesterday. I am using the aggressive 3D gears. Set the mesh on install by just holding vertical gear stack sort of finger tight while tightening the grub screw.

Other than loosing two sets of gears so far, the rave 450 on 4S rocks!!!
Jim Senicka
Team Manager, GrandRC Flight Team
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-31-2011 04:42 PM  8 years ago
jsenicka

rrProfessor

Eagle River, WI

MyPosts All Forum Topic
D'Oh

Found this

https://rc.runryder.com/t645676p1/
Jim Senicka
Team Manager, GrandRC Flight Team
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2011 03:30 PM  8 years ago
jbdww

rrElite Veteran

Round Rock, Texas

MyPosts All Forum Topic
The depth of the grove on the gears that go into the torque tube needs needs to be deeper on some gears. So you will need to file this grove deeper to a point where when you put the gears into the torque tube, that the gear on the opposite end do not pop out.Skids Up
http://www.jbdww.com
http://twitter.com/jbdww/
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-02-2011 03:41 PM  8 years ago
Wingman77

rrProfessor

Pulaski Tennessee

MyPosts All Forum Topic
also something I have found that extends the life a LOT, the tail pitch slider has room for much more pitch than you actually need. back it down until it blows out in flight both directions and then slowly add more until it holds for your flying. if you set up the pitch to go all the way to the tail case the blades just stall and it puts a heavy load on the gears.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 691 views POST REPLY
Home✈️Aircraft🚁Helicoptere-Elec-Helicopters New or Limited ActivityNext-D › Forward tail bevel gears....
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, May 27 - 10:47 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online