RunRyder RC
WATCH
 1 page 775 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityAvant › Building an e90...
05-13-2011 04:21 PM  7 years agoPost 1
3D-ALEX

rrApprentice

Daytona Beach, FL

My Posts: All  Forum  Topic

Ok guys so I'm probably going to start building an e90 in the next few weeks, and I already have the aurora kit. I do however need to order electronics and blades. It is going to be flybarless with the RJX head. This is what I am thinking so far. Futaba BLS451 on cyclic, BLS 251 on the tail, Futaba CGY 750, Kontronic Jive 80+HV, Scorpion HKIII-4035-530 on stock pinion, and a Fromeco DCUP to finish it off. I would use the parallel BEC's from the Jive to power the reciever and electronics in addition to the DCUP. I prefer extreme 3d flying, do you think this setup will work? This is my first e90, actually my first 90 in general, so I wouldn't know for sure. Also what blades do you recomend?

Thanks,
Alex

Alex Morley
Logo 6003D

PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 06:07 PM  7 years agoPost 2
Jason Bell

rrElite Veteran

California

My Posts: All  Forum  Topic

I would opt for the Jive 120 over the 80 to be sure you have no cut off issues.

Jason

AMain.com
Mikado "V Team"
Xnova Motors
Optipower USA
RCProPlus

PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 08:34 PM  7 years agoPost 3
3D-ALEX

rrApprentice

Daytona Beach, FL

My Posts: All  Forum  Topic

Thanks for the reply Jason. I have a custom heatsink that I was planning on using to ensure proper cooling, but I will consider the 120 as well.

Alex Morley
Logo 6003D

PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 10:03 PM  7 years agoPost 4
Jason Bell

rrElite Veteran

California

My Posts: All  Forum  Topic

I was able to shutdown the Jive 80 several times with the original 4035-500. The new HKIII 4035-530 is much much more powerful than the 500kv. So you will run the risk of shutting it down much more frequently with that motor.

AMain.com
Mikado "V Team"
Xnova Motors
Optipower USA
RCProPlus

PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 10:58 PM  7 years agoPost 5
3D-ALEX

rrApprentice

Daytona Beach, FL

My Posts: All  Forum  Topic

Ok thanks for the feedback. I just thought because I saw so many people running these on their 90's that they were good. But thanks anyway!

Alex Morley
Logo 6003D

PM  EMAIL  GALLERY  Attn:RR  Quote
05-17-2011 12:27 AM  7 years agoPost 6
3D-ALEX

rrApprentice

Daytona Beach, FL

My Posts: All  Forum  Topic

So now I am thinking BLS 351 instead of the 451's. Anybody have any experience to share with these servos?

Alex Morley
Logo 6003D

PM  EMAIL  GALLERY  Attn:RR  Quote
05-17-2011 01:31 AM  7 years agoPost 7
Tradhunt

rrKey Veteran

Fairfield, Ca. USA

My Posts: All  Forum  Topic

I'm running BLS451's on mine through my Vbar on 8v. Work great.

I don't crash... I land with style

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 775 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityAvant › Building an e90...
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, November 12 - 5:50 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online