RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1726 views TOPIC CLOSED
HomeAircraftHelicopterHelicopter Main Discussion › OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver
05-13-2011 12:36 PM  7 years agoPost 1
mcfast

rrKey Veteran

Quebec Quebec Canada

My Posts: All  Forum  Topic

I have a OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver

http://www.hobbyking.com/hobbyking/...idProduct=14300

Can any one tell me what servos goes where 1 to 8 for helli

Thanks

P.S. sorry for the spelling or the grammar I am dyslexic!

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 01:02 PM  7 years agoPost 2
TMoore

rrMaster

Cookeville, TN

My Posts: All  Forum  Topic

Plug the servos in and see what they do. That's the best way to tell.

TM

Delayed Response Operator Not Engaged
AMA SECTION 336 = Good
Drones = EVIL

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
05-13-2011 01:17 PM  7 years agoPost 3
RaptorRob

rrApprentice

hamlin P.A.

My Posts: All  Forum  Topic

mcfast

please post on how well it works i was thinking about getting a few for my small elect helis and planes

thanks
rob

no babe i swear i sold my other heli to buy this one :)

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 01:37 PM  7 years agoPost 4
sundust

rrNovice

Turkey

My Posts: All  Forum  Topic

@ RaptorRob : Im using 2 of them on my planes for about 3 months with no problems and no range problems too But I dont trust that much to put on a heli

700 LE
700 G

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 01:49 PM  7 years agoPost 5
RaptorRob

rrApprentice

hamlin P.A.

My Posts: All  Forum  Topic

thanks sun

gonna try it in my foam stryker first

i am weary of putting it in a heli also
alot of vibes

no babe i swear i sold my other heli to buy this one :)

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 01:50 PM  7 years agoPost 6
mcfast

rrKey Veteran

Quebec Quebec Canada

My Posts: All  Forum  Topic

Hi RaptorRob

Go have a look here

http://www.hobbyking.com/hobbyking/...idProduct=14300

P.S. sorry for the spelling or the grammar I am dyslexic!

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 01:51 PM  7 years agoPost 7
steve 01

rrProfessor

Grand Rapids MI

My Posts: All  Forum  Topic

1 aileron
2 elevator
3 throttle
4 rudder
5 rudder gain
6 pitch
7 govenor
8 whatever

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 01:53 PM  7 years agoPost 8
sundust

rrNovice

Turkey

My Posts: All  Forum  Topic

and please note that:

Note* Disable failsafe on transmitter, otherwise you will experience servo jitter.

This receiver is not compatible with the Satellitemode of the TFR8-S

700 LE
700 G

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 02:11 PM  7 years agoPost 9
steve 01

rrProfessor

Grand Rapids MI

My Posts: All  Forum  Topic

Thanks for the reminder I did not turn disable that yet

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 05:22 PM  7 years agoPost 10
Ace4

rrApprentice

Chandler, AZ

My Posts: All  Forum  Topic

I'm using one of the original ones (before they put a plastic case on them) in my Habu jet and it's been working great for months.

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 06:19 PM  7 years agoPost 11
lfalsetto

rrKey Veteran

COLORADO

My Posts: All  Forum  Topic

I have been using one on a 450 and one on a 1/4 scale cub, No problems at all. Remember to adjust the servo speed, Instructions are on Hobbykings website

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
05-13-2011 07:26 PM  7 years agoPost 12
OuttaControl

rrVeteran

Springfield, Missouri -United states

My Posts: All  Forum  Topic

receiver
Will this work wlth an 8fg?

Mine fall down, went BOOM!!

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 08:37 PM  7 years agoPost 13
kineticheli

rrApprentice

Turlock, CA

My Posts: All  Forum  Topic

It doesn't work with the 8fg. I tried it in 7 and 8 channel mode.

Citizen #130

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 08:41 PM  7 years agoPost 14
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

I tried one on the bench with my 8fg and it work fine on both 7 and 8ch modes.

$

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
05-13-2011 08:43 PM  7 years agoPost 15
kineticheli

rrApprentice

Turlock, CA

My Posts: All  Forum  Topic

I got everthing to work except the throttle.

Citizen #130

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 09:15 PM  7 years agoPost 16
jackheli

rrProfessor

Vancouver - Canada

My Posts: All  Forum  Topic

Works with my 10C
Note* Disable failsafe on transmitter, otherwise you will experience servo jitter.
Hmmm... haven't got it disabled and it actually goes into failsafe. No Jitter.

Mine must be a fluke...

It's easy to find an excuse to do wrong. Hard is not to find an excuse to do right.

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 10:08 PM  7 years agoPost 17
rapitrex

rrApprentice

south wales , uk

My Posts: All  Forum  Topic

igot 1 on my trex 250 , 1 on my katana 50 plane , 1 on my foam plane . all work fine, havent tried on my 2 50 size heli's didnt want to risk it til i knew if thay any good.

fuel it < check it <> fly it > clean it

PM  EMAIL  GALLERY  Attn:RR
05-13-2011 10:37 PM  7 years agoPost 18
Ace4

rrApprentice

Chandler, AZ

My Posts: All  Forum  Topic

Will this work wlth an 8fg?
It works fine with my 8FG.

PM  EMAIL  GALLERY  Attn:RR
05-14-2011 01:34 AM  7 years agoPost 19
helitom

rrApprentice

Pine Grove, Calif, USA

My Posts: All  Forum  Topic

I have several. They work fine with both my 14Mz and 9Z. However, the pitch for the servo plugs is a bit too narrow for Futaba and many other servo plugs. If you are using 6-7 channels as per typical heli, you really have to shove to get all the servos plugged in. That is of some concern; but, I've been using them for quite some time without issue.

The older I get, the fewer things seem worth waiting in line for.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
05-14-2011 03:09 AM  7 years agoPost 20
rcjon

rrVeteran

Macon, GA

My Posts: All  Forum  Topic

Fail safe? We don't need no stenkin fail safe.

Ask your doctor if your heart is healthy enough for Radio Control Helicoptering.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1726 views TOPIC CLOSED
HomeAircraftHelicopterHelicopter Main Discussion › OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Wednesday, November 21 - 12:21 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online