RunRyder RC
WATCH
 1 page 672 views Post Reply
05-02-2011 02:14 AM  10 years ago
Topic Vote0Post 1
EOP

rrNovice

Miami, FL

MyPosts All Forum Topic
Jive 80 HV on 6S
I was using my jive 80hv on 12S but now i'm looking to use it on 6S for a logo 500se with 553mm blades, 6s 5000man bat ans scorpion 2025-1100.

any one with some experience with this setup..?

anything will be helpful.

thanks.
Erik Ortega
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-02-2011 02:33 AM  10 years ago
rexxigpilot

rrProfessor

rexxig2@comcast.net

MyPosts All Forum Topic
The 500SE will pull too many amps for the 80HV on 6S if you fly mostly 3D. You will be better off with the ICE 100. For sport flying the 80HV will be fine on 6S, or go to 8S+ and you're good to go all around.

You could use the heat sink if you don't live in a place with blazing hot summers like we do.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2011 06:47 AM  10 years ago
EOP

rrNovice

Miami, FL

MyPosts All Forum Topic
thanks..will buy jive 100lv.Erik Ortega
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2011 05:06 PM  10 years ago
Yeehaanow

rrApprentice

Vermont

MyPosts All Forum Topic
as a side note I tried to program the HV80 with a 6s batt and the menus go.....reallllyyy.....sloooowww...... It must have taken 15 min to get to mode 11, then it wouldn't take my selection. Funny.-Tim
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-04-2011 07:43 AM  10 years ago
r.lim

rrNovice

Breda, The Netherlands

MyPosts All Forum Topic
It shouldn't make any different either you programming with 6S or 12S.
That is my experience.
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 672 views Post Reply
Print TOPIC

 2  Topic Subscribe

Monday, September 20 - 8:49 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online