RunRyder RC
WATCH
 1 page 1101 views Post Reply
Home✈️Aircraft🚁HelicopterFuel-Helicopters New or Limited ActivityNext D › Servo arm lenth for vbar on rave env
04-30-2011 05:05 AM  10 years ago
Topic Vote0Post 1
TattooArtist

rrVeteran

Chestnut Ridge NY

MyPosts All Forum Topic
Servo arm lenth for vbar on rave env
Hey guys im trying to set up my vbar and i wanted to know what
are your servo arms mm.i have mine 14mm and im getting wat too much pitch.at 80 on the vbar.15-15+
should i just use my pitch curve to get 12 12+
Team Synergy ,RcRcc,
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-30-2011 07:48 AM  10 years ago
rapidity

rrVeteran

ohio

MyPosts All Forum Topic
better mechanical, I think mine are like 7.5mm.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-30-2011 08:07 AM  10 years ago
Taipan

rrElite Veteran

Sydney, Australia

MyPosts All Forum Topic
Using BSL451s on mine with Vbar. 2nd hole out on servo arms, 10.5mm. Balls on inner holes of bellcranks. Depending on servos you'll need to put the elevator servo on the outside of the frames so that you can mount the servo balls on the outside of the arms as if on the inside like in the manual they will bind at 10.5mm.

100 collective on Vbar gives me +-15 degs for hold and using 7, 50, 93 pitch curve in idle up for +-13 degs. 80 cylic on Vbar gives me 8.5 degs, close enough & flies awesome.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-30-2011 11:14 AM  10 years ago
gotnoclue

rrApprentice

sydney

MyPosts All Forum Topic
im running the same as Taipan, and can say it flies awesome, no issues at all.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-30-2011 02:31 PM  10 years ago
TattooArtist

rrVeteran

Chestnut Ridge NY

MyPosts All Forum Topic
pitch
ok Thanks guys.i will try that
Team Synergy ,RcRcc,
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-30-2011 08:43 PM  10 years ago
PetterS

rrApprentice

Gothenburg, Sweden

MyPosts All Forum Topic
28mm servo diameter and inner hole on the bell cranks. I went for the shorter quick UK balls on the swashplate to get a better cyclic ratio.

One strange thing. if the machine has been sitting unused for a while the first flight the tails hunts a little bit. But subsequent flights are fine.

BR
/Petter
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
05-01-2011 01:21 AM  10 years ago
TattooArtist

rrVeteran

Chestnut Ridge NY

MyPosts All Forum Topic
Pitch
Thanks Guys i got 13 -13 and 8.5 on cyclics.so i will be testing in tomorow

Alex
Team Synergy ,RcRcc,
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-01-2011 01:26 AM  10 years ago
Taipan

rrElite Veteran

Sydney, Australia

MyPosts All Forum Topic
One strange thing. if the machine has been sitting unused for a while the first flight the tails hunts a little bit. But subsequent flights are fine.
The tail pitch mechanism can stick a little which explains that. It also tends to be fairly stiff when new, takes a bit of work n the bench to free it up & needs a few flights to wear it in as well.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-02-2011 01:59 AM  10 years ago
Pulento

rrVeteran

CHILE

MyPosts All Forum Topic
+1

Not on my Rave but on my 6HV the goop on the tail shaft gets sticky with time.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-02-2011 06:57 PM  10 years ago
TattooArtist

rrVeteran

Chestnut Ridge NY

MyPosts All Forum Topic
rave
I got 3 flights in yesterday and it flies nice thanks guys
Loving my RAVE ENV
Team Synergy ,RcRcc,
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1101 views Post Reply
Home✈️Aircraft🚁HelicopterFuel-Helicopters New or Limited ActivityNext D › Servo arm lenth for vbar on rave env
Print TOPIC

 2  Topic Subscribe

Wednesday, September 22 - 10:11 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online