RunRyder RC
WATCH
 1 page 537 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Fuel Helicopters Sold  Feeler - Used Align 600NSP (KX0160NPG)
04-27-2011 08:10 PM  10 years ago
Topic Vote0Post 1
SplinteredBird

rrApprentice

Leesville, LA

MyPosts All Forum Topic
My Classified Activity
No Classified Feedback
Add Classified Feedback
Feeler - Used Align 600NSP (KX0160NPG)
I'm looking to get out of nitro and go a touch smaller so I'm putting out this feeler for my 600NSP. This would be for LOCAL (MayDay, Sulphur, LA) sale only! I do not want to risk shipping this heli and having it destroyed by UPS or USPS or whatever.

This was my very first build but has been checked by some great local pilots. This kit is 1yr 2months old (Was purchased at the 1st Annual Cajun Helifest). The engine has only had 1 gallon through it and the heli has never been crashed (Local pilot will verify as I ONLY ever flew it with him).

The built kit is Align KX0160NPG 600NSP currently has Radix 600mm main blades and Quick UK Canopy mounts. Everything else is stock.

Electronics:
Align DS610 on Cyclic
Align DS620 on Throttle
Align DS650 on Tail
Spartan DS760 Gyro
Align 2-n-1
Align RCE-600 Gov
Spektrum AR7000 + Satellite

Batteries:
Align 1900mAh 2S Deans Connector
Hyperion CX G3 3300mAh 2S Deans Connector

Spares/Extras:
3 x NIP Align 600 Main Shaft (2ea package)
3 x NIP Align 600 Spindles (2ea package)
1 x NIP Align 600 Fly bar (2ea package)
1 x NIP Align 600 Tail boom (2ea package)
1 x NIP Align 600 Torq-Tube
1 x NIP Align Front TT gears (Might have 2packs)
1 x Opened Align 700 Tail fins (Good condition)
1 x NIP RC Screws Trex-600 Bearing set
1 x NIP KBDD Fly bar Paddles (Yellow)
1 x NIP KBDD Tail blades (Yellow)
1 x Spartan Gyro USB Programming plug
1 x NIP Carbon Fiber 600mm Blades (Hobby-king type)
1 x NIP Align 600mm Blades
1 x Opened Align Metal Engine Fan (Never installed)

I know I have a few other things around my house at this time but can't find them at this time, however if/when I run across other parts I am more than willing to send them to whoever buys this.

Notes/Mods:
I never set up the Gov for idle-up so the heli has never seen anything other than hover from me, and very mild FF from the local pilot who helped me double/triple check everything.

The canopy has a very minor ding in the nose from my car. The tail blades have very minor dings from small pebbles at one of the areas I hovered at.

I put dielctric grease inside the 2-n-1 to prevent the switch and unit from having problems that can be read about. I also purchased, but never installed the metal fan for future Gov use.

I purchased but never opened or installed the KBDD parts for future visibility.

I purchased the 700 Tail-fins but never installed or flew them because I wanted a little extra clearance for the tail rotor.

This heli is a VERY smooth flying bird thanks to the assistance of some local pilots.

I am wondering what I could fairly ask for, for all of this. I have been given a couple answers/ideas but would like to get more opinions as well as see if anyone might be interested.

If anyone has any questions please feel free to PM me.

Thank you for looking and happy flying!

EDIT: For spelling/grammar.
I love my flying lawn mowers!
AMA#: 943206
450Pro, 550FBL, 600N
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2011 08:26 PM  10 years ago
SplinteredBird

rrApprentice

Leesville, LA

MyPosts All Forum Topic
My Classified Activity
No Classified Feedback
Add Classified Feedback
Adding photo links
Here are some photos that I have from the build after maiden of the bird. I appologize for some of them being out of focus. My phone back then wasn't very good. You can see the heli should you go to MayDay.

The only change is I have since wrapped the wires. Sadly some of the wrap has frayed but the wires are all fine. You can also see where I used the soft-side of some velcro around the edges of the frame and wire to prevent any cutting of the wires.

I love my flying lawn mowers!
AMA#: 943206
450Pro, 550FBL, 600N
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 537 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Fuel Helicopters Sold  Feeler - Used Align 600NSP (KX0160NPG)
Print TOPIC

 1  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Monday, September 20 - 10:09 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online