RunRyder RC
WATCH
 1 page 839 views Topic Closed
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › help with vbar servo reverse issue
04-27-2011 02:08 PM  10 years ago
Topic Vote0Post 1
hotrodcaddy3

rrApprentice

oneida, ny , united states

MyPosts All Forum Topic
help with vbar servo reverse issue
trex 700n with vbar 5.0

i hooked up the wires as stated in the book and i am getting servos not moving in the right direction. please help before i set the vbar on fire and get a skookum..
watch me fly this, don't worry, read the book that came with the heli!!
SHARE  PM  EMAIL  GALLERY  Attn:RR
04-27-2011 04:24 PM  10 years ago
ChristianM

rrVeteran

Oslo, Norway

MyPosts All Forum Topic
You do not need the AR7000 and the GV-1 when using a VBar so you can sell them. Use two spectrum satelite RXs connected directly to the VBar unit. The VBar also has a governor built in to it so all you need is a RPM sensor. You can use the GV-1 sensor (if you decide not to sell it) or you can purchase another sensor such as the Spectrum back plate sensor. That should simplify your setup considerably.

Christian
Burn fuel, be happy
SHARE  PM  EMAIL  GALLERY  Attn:RR
04-27-2011 05:15 PM  10 years ago
raptormandan

rrApprentice

springhill florida

MyPosts All Forum Topic
help
like chris said...i use 2 sat rx's....get a back plate sensor from horizon...simple...upgrade ur vbar to pro.. use that gov already built in..enjoy
SHARE  PM  EMAIL  GALLERY  Attn:RR
05-03-2011 03:15 AM  10 years ago
hotrodcaddy3

rrApprentice

oneida, ny , united states

MyPosts All Forum Topic
ok so i hooked it up as the setup wizard states and no matter what i do the servos don't move the right way, what am i missingwatch me fly this, don't worry, read the book that came with the heli!!
SHARE  PM  EMAIL  GALLERY  Attn:RR
05-03-2011 03:24 AM  10 years ago
rexxigpilot

rrProfessor

rexxig2@comcast.net

MyPosts All Forum Topic
Have you reversed the servos direections as needed in the Servo tab of the setup? You click on the image of the servo to toggle between reverse/normal direction.
SHARE  PM  EMAIL  GALLERY  Attn:RR
05-03-2011 08:07 AM  10 years ago
MrMel

rrProfessor

Gotland

MyPosts All Forum Topic
Shot out of the dark,
Like rexxigpilot pointing out, check the SWASH step and match those channels to your physical arrangement and which channels those are plugged into.

99.9% of these issues: You have swapped Channel 2 & 3 servo cables.
Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more
SHARE  PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 839 views Topic Closed
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › help with vbar servo reverse issue
Print TOPIC

 3  Topic Subscribe

Friday, September 17 - 6:13 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online