RunRyder RC
WATCH
 6 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ] 14117 views Post Reply
Home✈️Aircraft🚁HelicopterMiniature Aircraft Whiplash & Fury 55 › New MA 90 Nitro - Whiplash - New Pics!
05-02-2011 04:18 AM  10 years ago
puma1824

rrVeteran

Maryland, USA

MyPosts All Forum Topic
Governor already in there, in the CGY-750.
Well like I said before...

Plenty of room - for that setup.

But what if your setup includes a regulator and a governor too...

My setup will include a BeastX, JR RX, Gryphon regulator, Multi Gov Pro, and a Li-Po battery.
There's plenty of room for those items. You can install some items under the tray, as mentioned on the side frames on the outside, and on the inside side under the tray as well. There are people (including myself) running a regulator, separate governor, FBL, switchglo on the Fury55 which has a smaller tray.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-02-2011 04:18 AM  10 years ago
Wyorcflyer

rrVeteran

Cheyenne, Wyoming USA

MyPosts All Forum Topic
My setup will include a BeastX, JR RX, Gryphon regulator, Multi Gov Pro, and a Li-Po battery.
Rock:

I had a similar list of stuff on my Fury 55 which is a similar configuration on the front as the Whippy but smaller of course. I put the regulator under the battery tray between the frames. I also put my receiver there but that would probably not work with JR. None the less - regulator under the tray, BeastX, RX and battery on the tray, Mutigov on the side frame. If you don't want all three, battery, Rx, BeastX on the face of the tray put either the RX or BeastX on the side.

It worked out very nicely on my Fury55, everthing was tidy and accessible. I am sure from the pictures that there is even more room on the Whippy.

EDIT: Puma. You type faster than I do!

Jack
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-02-2011 05:13 PM  10 years ago
Rockohaulic

rrElite Veteran

Canyon Country, CA, USA, 3rd Rock from the Sun

MyPosts All Forum Topic
Yep - don't think space will be an issue..........

thanks guys
Saturday morning I flew my helicopter in my pajamas
How it got in my pajamas I'll never know
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-08-2011 10:23 PM  10 years ago
blingboy

rrNovice

australia

MyPosts All Forum Topic
Whiplash
Is there any vid's of this beast yet ???
blingboy
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-08-2011 10:35 PM  10 years ago
Justin Stuart (RIP)

rrMaster

Plano, Texas

MyPosts All Forum Topic
I think the canopy looks quite nice.Avant RC
Scorpion Power Systems
Thunder Power RC
Kontronik Drives
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 10:47 PM  10 years ago
Rockohaulic

rrElite Veteran - Canyon Country, CA, USA, 3rd Rock from the Sun MyPosts All  Forum  Topic

I think the canopy looks nice too.

Mike & Brian:

Hmmm, can we get this canopy in a bright orange or even a fluorescent orange???

And who wants white on the bottom of a canopy - paint that orange too!

Saturday morning I flew my helicopter in my pajamas
How it got in my pajamas I'll never know
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 10:50 PM  10 years ago
Rockohaulic

rrElite Veteran

Canyon Country, CA, USA, 3rd Rock from the Sun

MyPosts All Forum Topic
So I read that this is not the production landing gear.

Hmmmmm, can we get additional plastic molded to the bottom ala Rave ENV? Comes in great for sliding autos!
Saturday morning I flew my helicopter in my pajamas
How it got in my pajamas I'll never know
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 11:28 PM  10 years ago
gotnoclue

rrApprentice

sydney

MyPosts All Forum Topic
The pictures of the gasser version had different landing gear on them which may have been more production spec
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 11:28 PM  10 years ago
ssmith512

rrKey Veteran

Indianapolis, IN USA

MyPosts All Forum Topic
Hmmmmm, can we get additional plastic molded to the bottom
Looks like the production gear has just that...........

Steve
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 11:41 PM  10 years ago
Rockohaulic

rrElite Veteran

Canyon Country, CA, USA, 3rd Rock from the Sun

MyPosts All Forum Topic
Sweet - I like it when they read my mind!

That landing gear looks like you could run a tank over it and not hurt it!
Saturday morning I flew my helicopter in my pajamas
How it got in my pajamas I'll never know
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 11:42 PM  10 years ago
Rockohaulic

rrElite Veteran

Canyon Country, CA, USA, 3rd Rock from the Sun

MyPosts All Forum Topic
What's that flybar looking thing with paddles???Saturday morning I flew my helicopter in my pajamas
How it got in my pajamas I'll never know
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2011 11:43 PM  10 years ago
ssmith512

rrKey Veteran

Indianapolis, IN USA

MyPosts All Forum Topic
What's that flybar looking thing with paddles???
V-bar's paddle simulation V1.0
Steve
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-15-2011 03:11 AM  10 years ago
rtdillon

rrApprentice

Huntsville, AL

MyPosts All Forum Topic
Gasser
This machine with a CGY750, a 3channel sb RX a 2 cell lipo and HV servos would be the ultimate gasser! I wonder if I can order FBL?

I wonder if the gas tank from the new JR gasser would fit? It has a gas cap for easy fill!
No,No..The other left!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-15-2011 05:41 PM  10 years ago
777ER

rrApprentice

Westchester county, NY, USA

MyPosts All Forum Topic
That landing gear looks like you could run a tank over it and not hurt it!
At the same time, it looks taller so the recoil pull start clear the ground.

I have a feeling that a hard landing that can cause a major boom strike will break or damage the lower CF frame (specifically the CF tabs that extends out for the landing gear attachement)
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-17-2011 01:32 PM  10 years ago
kcordell

rrElite Veteran

O Fallon, MO

MyPosts All Forum Topic
The nice thing about the landing gear is that all 4 pieces are the same. If you damage one, all you have to do is change 1 piece out.Team Synergy/Rail, Team Scorpion, YS Engines, VelTye
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-17-2011 03:01 PM  10 years ago
hootowl

rrProfessor

Garnet Valley, Pa.

MyPosts All Forum Topic
Hope there is a good strong crossmember between the landing gear struts, between the frame tabs.Wolves don't lose sleep over the opinions of sheep
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-22-2011 08:01 PM  10 years ago
ssmith512

rrKey Veteran

Indianapolis, IN USA

MyPosts All Forum Topic
Any retailers taking preorders on the nitro yet? I really need to get one of these!Steve
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2011 09:59 PM  10 years ago
Rockohaulic

rrElite Veteran - Canyon Country, CA, USA, 3rd Rock from the Sun MyPosts All  Forum  Topic

Met the guys at the San Diego Fun Fly this weekend. What a great bunch of guys!

Here are pics of some of the really cool design innovations in this bird.

First Pic: Bearing blocks and a hint of the huge one-way bearing in the clutch bell and the huge pinion. The guys said that the one-way only sees 1/8th of the torque load by incorporating it with the clutch bell instead of the main gear. Sweet!

Look ma - no additional tail gear!

Tail Bellcrank - so that's why they need the smiley cutout on the right main frame! (It pivots at the top)

Torque Tube tail gear/bearing block

Saturday morning I flew my helicopter in my pajamas
How it got in my pajamas I'll never know
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-23-2011 01:51 AM  10 years ago
ssmith512

rrKey Veteran

Indianapolis, IN USA

MyPosts All Forum Topic
Nice pics!! Thanks for posting!Steve
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-23-2011 03:19 AM  10 years ago
VKGT

rrElite Veteran

Sanford, NC

MyPosts All Forum Topic
Nice looking heli!! Always thought my Min Air helis flew the best out of everything that I've owned
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 6 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ] 14117 views Post Reply
Home✈️Aircraft🚁HelicopterMiniature Aircraft Whiplash & Fury 55 › New MA 90 Nitro - Whiplash - New Pics!
Print TOPIC

 23  Topic Subscribe

Sunday, September 26 - 10:47 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online