RunRyder RC
WATCH
 1 page 894 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Castle Electric Components › CASTLE ICE 120HV AND HACKER TURBINE 640KV IN LOGO 600
04-25-2011 10:37 PM  10 years ago
Topic Vote0Post 1
Craig Simmons

rrKey Veteran

wolverhampton uk

MyPosts All Forum Topic
CASTLE ICE 120HV AND HACKER TURBINE 640KV IN LOGO 600
I have a logo 600 with a hacker turbine motor and a castle 120hv esc.

There are 3 options :
12khz:Recommended for most brushless motors. This is the FAFACTORTORTORY setting for all Phoenix and Phoenix HV controllers

16 kHz: Recommended for low inductance motors. RARE. Suggested for Kontronik Tango motors.

24 kHz: Recommended for very low inductance motors.

Outrunner Mode*: Recommended for all outrunner motors. This is the FAFACTORTORTORY setting for Phoenix Ice and Phoenix Ice HV.

My hacker is 8KHz so which option should i use ?
any help would be great ...

thanks
craig
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-25-2011 11:17 PM  10 years ago
RobMcQuillen

rrKey Veteran

Rochester, NY

MyPosts All Forum Topic
I would either go with 12khz or outrunner mode.

Rob
Rob McQuillen
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2011 11:38 PM  10 years ago
Craig Simmons

rrKey Veteran

wolverhampton uk

MyPosts All Forum Topic
thanks rob,

the motor isnt an outrunner so ill try 12khz mode

thanks again

craig
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-26-2011 12:08 AM  10 years ago
TrevJonez

rrKey Veteran

St.George, Utah - USA

MyPosts All Forum Topic
how are you liking turbine thus far?

i put two into a JR vibe 90 SG for a guy. first one burned up under normal f3c flight conditions. the second one had a few flights where the esc kept loosing timing with it and so we pulled it out and put in the new A50 turnado motor.

personally i thought the turnado seemed to run circles around the turbine...
Who cares... its just money...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-26-2011 02:12 AM  10 years ago
Wave

rrKey Veteran

Illinois

MyPosts All Forum Topic
I believe there is a 8khz setting available via castle link and the software.

TrevJones, I just picked up a Turnado motor as well. I can't wait to try it out. Definately a bargain at $170 compared to the $210 that Scorpion is charging.

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-26-2011 08:22 AM  10 years ago
Craig Simmons

rrKey Veteran

wolverhampton uk

MyPosts All Forum Topic
been using the turbine with a power jazz esc , been really powerful, runs really smooth and consistant and running really cold..

so i have had a good experience with it so far.

thanks
craig
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-26-2011 10:47 AM  10 years ago
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
I would try 12khz and 8khz using the Castle Link and see which makes it run cooler.60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 894 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Castle Electric Components › CASTLE ICE 120HV AND HACKER TURBINE 640KV IN LOGO 600
Print TOPIC

 4  Topic Subscribe

Monday, September 20 - 8:47 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online