RunRyder RC
WATCH
 1 page 611 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsFutaba CGY › Default settings
04-25-2011 02:10 AM  7 years agoPost 1
chopper63

rrApprentice

West Coast Chopper

My Posts: All  Forum  Topic

I bought a used 750. It was used in a 700E. I'm planning to use it in a 450Pro. Do I need to re-set the unit to factory default settings first before programming it? Thanks.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2011 02:32 AM  7 years agoPost 2
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

Not mandatory, but I would anyway. It would be a safer route than risking not catching something wrong hiding in one of the menus, be it accidental or intentional. It doesn't take long to set one up from scratch anyway.

Let me know if you need help.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2011 02:33 AM  7 years agoPost 3
shlm

rrKey Veteran

West Chester, PA

My Posts: All  Forum  Topic

I would say that resetting it to factory defaults would be a best practice. Based on my understanding you will need to go into each of the functions and reset them. Note that SBus reset is in the normal menu while the others are in the expert menus (if memory serves me).




Steven B.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2011 04:38 AM  7 years agoPost 4
chopper63

rrApprentice

West Coast Chopper

My Posts: All  Forum  Topic

It appears that there is not a universal, or single, button to press to reset all functions to default.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2011 05:31 AM  7 years agoPost 5
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

No, that is correct. I personally wouldn't want such a feature without at least two layers of confirmation to execute. I wasn't paying attention one night and reset all my linkage compensation by accident. It would have really sucked if that error had reset everything.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2011 11:42 AM  7 years agoPost 6
Ben-T-Spindle

rrProfessor

Central Illinois

My Posts: All  Forum  Topic

Is there a utility to download the settings to a file? The way it is now when I swap helicopters it’s a real pain to write down all the settings and program the new ones.

If not maybe they should have several model memory like transmitters?

Maybe a future firmware upgrade to make one of those two work.

... BTS

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 611 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsFutaba CGY › Default settings
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, July 21 - 5:25 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online