A little confused by 6108SB instructions.
Can someone confirm, or otherwise, that my understanding is correct as both 8FG, electric flight and 6108SB are all new to me.
GY701 attached to 6108SB via SBus, (using gyro only for the moment). GY701 outputs to tail servo. Gyro gain is also output from Rx through SBus.
ESC plugs into channel 3 on 6108SB, channels 1,2 and 6 for ail, elev and pitch respectively.
I do not need to use the short plug.
I do not need to re-assign channels on the 8FG.
8FG, frequency set to FASST, MULT
I can plug Rx power or BEC into any of the other standard channels