RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 485 views POST REPLY
HomeAircraftHelicopterEngines Plugs Mufflers Fuel › can a tuned pipe help prevent bearing premature wear
01-13-2011 01:58 AM  7 years agoPost 1
concho

rrApprentice

montreal canada

My Posts: All  Forum  Topic

just wonrdering if a good tuned pipe can help to prevent preignition
that ruin bearings
thanks

PM  EMAIL  Attn:RR  Quote
01-13-2011 02:39 AM  7 years agoPost 2
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

NO.

Is not just a matter of having a good tune pipe or muffler.

You can have a good engine, the correct muffler, good 30% fuel, the correct plug, head shimmed to the perfect clearance for plug and fuel, and IF YOU MISSED THE MIXTURE SETTING ON THE LEAN SIDE YOU WILL END UP SLOWLY DAMAGING THE BEARINGS AND THE REST OF THE ENGINE!

2 Stroke engine tunning has become easier with today's better carbs, but if you desire to extract the most out of them, you need to know how to tune to your machine specifics and HOW YOU FLY.

Heavy enphasis on HOW YOU FLY.
Example, and person who flies easy, does a few consecutive flips and flies around again can stand a leaner setting that one who really loads the head on off all the time.

Aids like Carbsmarts can help if you can set the parameters and linkage right. Newer regulated OS carbs (and old Cline Regs) also keep better constant fuel flow when demands rise. A well set YS does well too. The entire Fuel System (tubing, clunk or fuel magnet, filters, tubing) plays another important role.

The trick is to know how much on the rich side you need to tune to accomodate the most harsh load and moment YOUR engine will see in YOUR flight.

Two diferent flying style individuals with identical helicopter will need two diferent neddle settings.

The safe way to approach your optimal settings is start rich, fly the same short routine, monitor temperature, re-neddle, and repeat until the temp begins to rise or you feel the engine sags under load. Be careful, OS engines can run on the hot/lean side for a bit and not drop power while they are destroying itself. This is why temp monitoring is important. Dont ask me what temperature is a safe limit, all engines run slightly diferent depending on weather, fuel, muffler, etc.

Your engine must be able to hold virtually constant through a tank of fuel. If it does not, you have details in your fuel delivery you need to address.

Clear as mud, right?

BTW, bearings are cheap, change them as least one a season or when you see noticeable performance drop, idle is hard to maintain, or the most obvious, they get loud.

Santiago

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 485 views POST REPLY
HomeAircraftHelicopterEngines Plugs Mufflers Fuel › can a tuned pipe help prevent bearing premature wear
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, June 23 - 3:46 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online