RunRyder RC
WATCH
 1 page 449 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › Proper backlash main gear -pinion 1.0 mod
01-01-2011 09:40 PM  7 years agoPost 1
matrosek

rrKey Veteran

Brooklyn

My Posts: All  Forum  Topic

I see that lot of guys are still asking what is a proper backlash between those two...

I would say :
push it firmly against the main gear and then back it off just a tinny bit.I did this on all my helis,never had a problem.Too loose = no good,too tight = no good.No paper or any other tricks needed.
As you can see from a video,there is a little play between a main gear and a pinion.
hope,this helps

Watch at YouTube

Scorpion
Haiyin lipo

PM  EMAIL  GALLERY  Attn:RR  Quote
01-01-2011 09:53 PM  7 years agoPost 2
cba7824

rrApprentice

Cordova, Alaska - United States

My Posts: All  Forum  Topic

Been doing it that way myself on all my electric heli's and no problems.

Charlie (Alaska)
TDR,Pyro30-12,Jive120HV,Vbar5Pro
Logo600,Xera4025-560,Jive80HV,Vbar5Pro

PM  EMAIL  GALLERY  Attn:RR  Quote
01-01-2011 10:37 PM  7 years agoPost 3
erict

rrApprentice

Ct

My Posts: All  Forum  Topic

I fold a slip of paper once. Slide it in the gear mesh. Push the two together as hard as I can. Bolt it tight. Never had a problem. Hope this helps! Happy new year.

Eric

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 449 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › Proper backlash main gear -pinion 1.0 mod
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, August 18 - 5:52 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online