RunRyder RC
WATCH
 1 page 378 views POST REPLY
HomeAircraftHelicopterBeginners Corner › E325 gyro/mixer help
12-31-2010 02:06 PM  7 years agoPost 1
CUJO

rrApprentice

San Angelo, TX

My Posts: All  Forum  Topic

I tried listing this on the actual eTT section with low response so I'll post it here.

I got a TT E325 with everything installed but the reciever. I bought a Futaba ch receiver to go with my TX.

Can I bypass all the functions except throttle and gyro with my servo leads and go straight to the reciever and use the plate functions on my radio instead of the mixer supplied by TT?

Secondly it says the leads have to be up, but is that towards the atanaes or to what I'ld call the base? I get alot of wiggle real fast from the system but then it just quits, I can't figure out how I'm hooking it up wrong as I figured if it was an adjustment the servos would just bottom out but their not, their wiggling for a minute then stopping.

Any help would be great.

Rappy 50 Titan, OS Hyper 50, Futaba 2.4 7ch.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2010 02:23 PM  7 years agoPost 2
CUJO

rrApprentice

San Angelo, TX

My Posts: All  Forum  Topic

I guess I should also mention that I was trying to just use a regular 4v Rx battery to power everything up. I didn't hear anything from the ESC so is it like a car battery where if there isn't enough power in the whole circuit the whole thing won't run right? Do I need to go ahead and charge and connect my LiPo for the power it needs?

Rappy 50 Titan, OS Hyper 50, Futaba 2.4 7ch.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-01-2011 03:40 PM  7 years agoPost 3
RCHSF

rrKey Veteran

NC

My Posts: All  Forum  Topic

I done some searching for you. See this page> I belive this is what your looking for. It's all I could locate, after even more hunting around. Hope it helps.

https://rc.runryder.com/t395194p1/

PM  EMAIL  Attn:RR  Quote
01-01-2011 09:55 PM  7 years agoPost 4
CUJO

rrApprentice

San Angelo, TX

My Posts: All  Forum  Topic

Oh wow, thanks, that'll help a whole lot!

Rappy 50 Titan, OS Hyper 50, Futaba 2.4 7ch.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 378 views POST REPLY
HomeAircraftHelicopterBeginners Corner › E325 gyro/mixer help
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, October 19 - 11:06 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online