RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 516 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › Benzine issue
12-29-2010 04:02 AM  7 years agoPost 1
mchandrasegran

rrNovice

Kuala Lumpur, Malaysia

My Posts: All  Forum  Topic

Guys,

I have a benzine setup and flys nicely except when its decending (decending by reducing collective), it tends to roll to the right which needs a lot of left cyclic to counter this.

Would really appreaciate if someone could shed some light.

Thanks in advance.

regards

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 05:42 AM  7 years agoPost 2
SeismicCWave

rrVeteran

Hilo, Hawaii

My Posts: All  Forum  Topic

Start by checking your linkages on the ground without firing up the engine. Does the swash plate stays level through the entire collective range. How about different flight modes? Are all your servos moving the same speed? It is most likely a mechanical problem.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 02:28 PM  7 years agoPost 3
Notar

rrKey Veteran

Taxachussetts

My Posts: All  Forum  Topic

Check the rods from the inner ring of the swashplate to the blade grips. Be sure the rod is parallel with the main shaft. If not, loosen the clamp with the pins, and rotate until those rods are straight up and down.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 516 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › Benzine issue
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, June 22 - 8:03 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online