RunRyder RC
 5  Topic Subscribe
WATCH
 1 page 598 views POST REPLY
HomeAircraftHelicopterMiniature Aircraft Whiplash & Fury 55 › new to me fury a couple ? help..
12-28-2010 09:58 PM  7 years agoPost 1
winginit69

rrApprentice

southbury. ct. usa

My Posts: All  Forum  Topic

it is a .60 with a ys.61st2 what nitro should i run with this engine?
Also what size blades main and tail? Bill

PM  EMAIL  GALLERY  Attn:RR  Quote
12-28-2010 10:36 PM  7 years agoPost 2
GotyaNick6100

rrNovice

Hollister,CA-USA

My Posts: All  Forum  Topic

Powermaster 30% is a good start for performance! It calls for 15 ~30% nitromethan and an oil content of 20 ~23% low viscosity oil.

GotyaNick

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-28-2010 10:42 PM  7 years agoPost 3
GotyaNick6100

rrNovice

Hollister,CA-USA

My Posts: All  Forum  Topic

Mavrikk or Rotor Tech Carbon Main Blade 3D 550mm A-Tip will fly nice W/ CFK Tail Blade 95mm Both are good and rather inexpensive~

GotyaNick

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-28-2010 10:53 PM  7 years agoPost 4
Band1086

rrElite Veteran

Kennewick, Wa. USA

My Posts: All  Forum  Topic

My suggestion would be to run 690mm main blades with 105mm tails(you might get away with 95's on the tail) and either PM 30% or CP 30% fuel

PM  EMAIL  GALLERY  Attn:RR  Quote
12-28-2010 10:54 PM  7 years agoPost 5
winginit69

rrApprentice

southbury. ct. usa

My Posts: All  Forum  Topic

i thought ys was a low nitro engine,Hmm
550mm thats the size my hawk called for with a o.s .37 i thought i would need something in the 600 680mm range?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 12:05 AM  7 years agoPost 6
jw637362

rrNovice

golden, colorado-usa

My Posts: All  Forum  Topic

Winginit69 -
With the YS60st - I am running 20% Cool Power. Your not looking for extreme power, and it Runs cooler.
I am pretty sure you do not wantanything shorter than 680 - 680 - 710 mm Mains.
Is the Fury a .50 size or .60 size heli?
I have 700MM SAB's on My X-Cell 60 Graphite SE at the moment And it has great power. I am going to get some 690's for grins later on.

That's just what I use.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 12:09 AM  7 years agoPost 7
MinAirUSA

rrVeteran

Bavaria, Germany

My Posts: All  Forum  Topic

550's will be too small, that model with that engine should be using 660 to 680 size blades. T/R blades 95mm will work fine.

Any of the modern 15% to 30% nitro heli fuels will work.

Miniature Aircraft

PM  EMAIL  Attn:RR  Quote
12-29-2010 01:09 AM  7 years agoPost 8
Band1086

rrElite Veteran

Kennewick, Wa. USA

My Posts: All  Forum  Topic

i thought ys was a low nitro engine,Hmm
something in the 600 680mm range?
They can use anything from 10% - 30% but our experience was the higher nitro fuels made them tune easier and run nicer.
660 would be the very shortest I'd use, but 660 and 680 aren't as common as they once were. I think 690's would be fine as long as you don't pull too much pitch and they are easy to find and replace if need be...

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 03:49 AM  7 years agoPost 9
MinAirUSA

rrVeteran

Bavaria, Germany

My Posts: All  Forum  Topic

They can use anything from 10% - 30% but our experience was the higher nitro fuels made them tune easier and run nicer.
660 would be the very shortest I'd use, but 660 and 680 aren't as common as they once were. I think 690's would be fine as long as you don't pull too much pitch and they are easy to find and replace if need be...
agreed

Miniature Aircraft

PM  EMAIL  Attn:RR  Quote
12-29-2010 06:00 AM  7 years agoPost 10
HeliNerd

rrApprentice

Navarre, FL

My Posts: All  Forum  Topic

I have a Fury expert, OS .70. I run 20% coolpower and MAH 690 mains, with the stock plastic 95mm MA tail blades. Runs great! It's my "old reliable" as it's pushing 6 years old now.

Lets see some pics if you have them!

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 06:07 AM  7 years agoPost 11
winginit69

rrApprentice

southbury. ct. usa

My Posts: All  Forum  Topic

Thank`s for the help MIN AIR. and guys.
It`s nice to get the answers from the man himself!

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 06:18 AM  7 years agoPost 12
HeliNerd

rrApprentice

Navarre, FL

My Posts: All  Forum  Topic

The Expert is on the right. Stratus on the left.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 598 views POST REPLY
HomeAircraftHelicopterMiniature Aircraft Whiplash & Fury 55 › new to me fury a couple ? help..
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Saturday, June 23 - 5:05 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online