RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 941 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityNext D › Futaba GV-1 on the Rave ENV ?
12-27-2010 10:01 AM  7 years agoPost 1
kawaznic

rrApprentice

Bréval, FRANCE

My Posts: All  Forum  Topic

Hi,

I just started building my rave. Tail and head completed. Also installed the magnets on the clutch bell.
But now, I have some questions about mounting the sensor of my GV1 on the rave...

How can I do that ??
Has anyone some pics to share ?

Regards, Nicolas

PS : May be, I can switch the sensor the a spektrum sensor. But does it work on the governor ?

PM  EMAIL  Attn:RR  Quote
12-27-2010 12:13 PM  7 years agoPost 2
KingJoeMack

rrVeteran

New Baltimore, Mi USA

My Posts: All  Forum  Topic

This has been asked a number of times.
Check here:
https://rc.runryder.com/t622961p1/

Fly with scheduled ground contact !

PM  EMAIL  GALLERY  Attn:RR  Quote
12-27-2010 04:13 PM  7 years agoPost 3
kawaznic

rrApprentice

Bréval, FRANCE

My Posts: All  Forum  Topic

Thanks KingJoe for the links.
But I knew these ones !
They talk about total-G or spektrum, and not of Futaba sensor, which is quite different.

That's why I asked the question.

Any help appreciated.

Regards, Nicolas

PM  EMAIL  Attn:RR  Quote
12-27-2010 05:55 PM  7 years agoPost 4
KingJoeMack

rrVeteran

New Baltimore, Mi USA

My Posts: All  Forum  Topic

I am sorry, yes it has a different signal, I am not sure, you might want to contact Curtis, or just use the governer that is in the Total G.

Fly with scheduled ground contact !

PM  EMAIL  GALLERY  Attn:RR  Quote
12-30-2010 04:19 PM  7 years agoPost 5
rcnut

rrElite Veteran

Rockford, Illinois

My Posts: All  Forum  Topic

kawaznic,

Your sensor for the GV1 can mount close to the same way as the Total-G sensor.

It's the principal of how it can be mounted.

Team Miniature Aircraft
"I love the smell of Nitro in the morning!"
...Citizen 654!

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2010 12:26 AM  7 years agoPost 6
SkyfoxSXer

rrApprentice

Gainseville,VA

My Posts: All  Forum  Topic

I could not get the GV1 sensor to mount on the clutch stack without removing the sensor from the plastic sensor casing. Once it was removed I was able to mount it just like the picture in the previous post. I was concerned about the sensor failing but so far it is holding up after thirty flights.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2010 12:38 PM  7 years agoPost 7
kawaznic

rrApprentice

Bréval, FRANCE

My Posts: All  Forum  Topic

Hi,

Here is how the gv1 sensor is mounted on my rave.
Works fine with 97% on sensor's reader !

Nicolas

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 941 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityNext D › Futaba GV-1 on the Rave ENV ?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, June 24 - 4:08 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online