RunRyder RC
WATCH
 1 page 843 views POST REPLY
HomeTurbine✈️Aircraft🚁HelicopterTurbine Helicopters › 12x throttle curve for a Wren 54
12-25-2010 05:51 PM  9 years ago
Topic Vote0Post 1
ron6460

rrApprentice

MASS THE GET F$*KED PAY! PAY! STATE

MyPosts All Forum Topic
12x throttle curve for a Wren 54
Just fired up my Wren54 in my Intrepid I have always had jetcat with the goveners built in!!! Any sugestions on a throttle curve???? Thanks to ALL !!Ron
" It was not me ! The sun was in my eyes Super Fly "
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-27-2010 05:10 PM  9 years ago
Chris Bergen

rrElite Veteran

cassopolis, MI USA

MyPosts All Forum Topic
Whatever it takes to set your headspeed at 1450 in the hover, up to 1650 in idle ups for aerobatics.

Each engine has shown itself to be slightly different from the next. One heli/engine hovers at 47%, the next at 54%.

Use your tach to read your HS in a hover and adjust your throttle curve up or down as needed to achieve the 1450 in normal mode.

Copy that to idle 1, then slowly increase it a few points to raise the headspeed to the the desired RPM, say 1550 in idle 1, repeat for idle 2 with a HS of 1650.

Mirror the bottom side of the curve to the top side then you can verify your inverted HS as well.

HTH,
Chris D. Bergen
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 843 views POST REPLY
HomeTurbine✈️Aircraft🚁HelicopterTurbine Helicopters › 12x throttle curve for a Wren 54
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Thursday, February 20 - 6:32 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online