RunRyder RC
WATCH
 1 page 1804 views POST REPLY
12-23-2010 03:05 AM  9 years ago
Topic Vote0Post 1
homerlex

rrApprentice

USA

MyPosts All Forum Topic
Novus CP - Tail rotates CCW
I've had this Novus CP for about a year. Its still all stock motors.

All of the sudden the tail can't hold. As I spool up its OK I start to lift off and its ok. Once I start to get a little altitude ( a few inches) the heli spins counter clockwise and no amount of tail input will stop it from spinning.

I thought perhaps the tail motor was starting to fade so I got a new motor. It does the same thing with the new motor. I tried a new tail rotor as well. Still spins.

Any ideas?
SHARE  PM  EMAIL  Attn:RR  Quote
12-26-2010 02:43 AM  9 years ago
RRuiz

rrApprentice

Puebla, Mexico

MyPosts All Forum Topic
Well I just receive the same gift for Christmas (Novus CP) with the same issue. I found that the tail rotor gear were not making contact, so the motor transmition was not transmited to the blades. The concern is that I couldn´t find a way to keep them tight.

Once again the quiestions is... any ideas?

Thanks
Roberto

Don't let confidence exceed ability
SHARE  PM  EMAIL  Attn:RR  Quote
12-26-2010 01:57 PM  9 years ago
homerlex

rrApprentice

USA

MyPosts All Forum Topic
^^ My tail gears are meshing and the tail is spinning so my problem is different.

I've replaced everything for the tail with the exception of the 3 in 1. Perhaps that needs to be replaced :-(
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1804 views POST REPLY
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, February 27 - 9:25 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online