RunRyder RC
 3  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2210 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › Kontronik and cut-off.
12-29-2010 03:05 AM  7 years agoPost 21
spdntckt

rrApprentice

San Jose, CA USA

My Posts: All  Forum  Topic

+1 on the soldering job. FWIW i had a motor which came with pre-soldered connectors - turns out that one of them was a cold solder joint. I would re-check your solder joints. A cold solder joint can give unpredictable impedance that varies with load and vibration which will mess with the ESCs circuitry..

these days i use large 5mm bullets on the motor and just use a small torch to get the solder nice and hot in there...

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 03:33 AM  7 years agoPost 22
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

+2 on the soldering job. Check them and resolder them.
the version 7 of jive has at least 2 years so , the period had passed and if has purchase a version 7 jive now I don´t now what happend with that.
The update was free as it corrected issues with the V7 software. I did it to three controllers, no charge except for shipping.......Ron

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 08:26 AM  7 years agoPost 23
HilliHeli

rrVeteran

S.MI./FL.

My Posts: All  Forum  Topic

Thanks for the correction (I completely forgot about the fix)

!Antriebe, die bewegen!
Henseleit-Helicopters.de
Jazz', Jives & vbar's
Futaba FASST / FASSTest

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 08:20 PM  7 years agoPost 24
enry74

rrNovice

Rimini - ITALY

My Posts: All  Forum  Topic

attack telemetry, is that of my last flight.
The peak of Amper who ran the Jive in cut-off does not seem as high.

It is possible that the telemetry does not record the true peak?

I hope that the problem is due to the fact that the Jive working with a percentage of 60%.

Enrico.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2010 08:22 PM  7 years agoPost 25
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

No that definitely is not it as I run my setups around there all the time

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2210 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › Kontronik and cut-off.
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Monday, June 25 - 9:00 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online