RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4070 views POST REPLY
Home✈️Aircraft🚁HelicopterHenseleit 3DNT - Rocket - 3DMP › Pyro BLACK Edition motors
12-24-2010 08:19 AM  9 years ago
NOLONGERFLYING

rrKey Veteran

Scottsdale, AZ

MyPosts All Forum Topic
Skint said it best... February 2011 it will be anounced.

I am guessing it is a new line of ESC/Motor both. Motor most likely premium edition and the ESC will have new software and possible new hardware which is included in the "Black" edition. the black edition is just the engraved(mine has 13/150 on it engraved) and first lot vs. mass produced is my guess, just a guess again.

I am sure alot more to come on this. I will get better pictures with my camera vs. phone posted tommorow. The manual is the old manual but the letter sent stated what I quoted among other things. It will deffinetly kill the new scorpion imo. Alot thicker wire etc. Once again you pay for what you get. More to come, with pictures.
Team MyColdHardCash
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-24-2010 08:21 AM  9 years ago
JohnDa

rrVeteran

England, South West

MyPosts All Forum Topic
I aware of that but I thought there was a reason for providing a link as if you were directing us towards something to do with it(even though the link was wrong.
SHARE  PM  EMAIL  Attn:RR  Quote
12-24-2010 08:23 AM  9 years ago
NOLONGERFLYING

rrKey Veteran

Scottsdale, AZ

MyPosts All Forum Topic
It said check the link in February 2011 but you ESC will already handle it. Does that make more sense?

I will scan and block out certain parts of the letter tommorow and post it for you all.
Team MyColdHardCash
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-24-2010 12:02 PM  9 years ago
helicraze

rrElite Veteran

Victoria - Australia

MyPosts All Forum Topic
I imagine that there is something coming for new L700!

I would like to know more about the jive new features.

The only thing with these high powered motors you need it to be hand wound and its time consuming and cannot keep up with demand if they are popular
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-24-2010 05:07 PM  9 years ago
NOLONGERFLYING

rrKey Veteran

Scottsdale, AZ

MyPosts All Forum Topic
I know the wiring is alot thicker, but I can't imagine why they would all have to be hand wound? Can someone please explain this? I know mine is hand wound, but are the scorpions as well and if so, why?Team MyColdHardCash
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-24-2010 05:26 PM  9 years ago
Ronald Thomas

rrMaster

Gainesville, Fl, USA

MyPosts All Forum Topic
I think I read it has something to do with that machinery that does the winding not being able to handle it properly. I am not completely sure though Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-24-2010 11:28 PM  9 years ago
helicraze

rrElite Veteran

Victoria - Australia

MyPosts All Forum Topic
The pyro and LE scorpion motors are hand wound, its because using such large dia copper wire you need to go up and down and bend them etc its painfully slow, there is no room for error.

No machine can do this!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-30-2010 06:00 AM  9 years ago
OICU812

rrMaster

Edson, Alberta, Canada

MyPosts All Forum Topic
The wire is 1.4mm in diameter for the Black Edition, same as Scorpion 4525, it can as said only be wound by hand and is a very time consuming task. The person wiring it not only must get it wound tight enough, but to not make error in degrading the wire insulation etc in any way....Once upon a time there were Nitros, flybars and frequency pins...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-30-2010 07:37 AM  9 years ago
NOLONGERFLYING

rrKey Veteran

Scottsdale, AZ

MyPosts All Forum Topic
weather hasnt been good here so havent flown my heli nor installed motor yet due to weather/business. Any comments on people that have flown the new combo?Team MyColdHardCash
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4070 views POST REPLY
Home✈️Aircraft🚁HelicopterHenseleit 3DNT - Rocket - 3DMP › Pyro BLACK Edition motors
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, February 19 - 4:36 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online