RunRyder RC
WATCH
 1 page 841 views POST REPLY
Home✈️Aircraft🚁HelicopterHIROBOHirobo SDX › End of Heli sabatical
10-12-2010 04:51 AM  8 years ago
Topic Vote0Post 1
DrHeli

rrApprentice

Monterrey, Mexico.

MyPosts All Forum Topic
End of Heli sabatical
Hi all, a year has pass that I stoped flying for not good reason, but yesterday I thoroughly cleaned my Evo and Lepton,Im good to go again, my Evo flies like a dream, would like to get an SDX.
Could someone put their set up and comments on the Heli.

Thx.
Bernie
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-12-2010 06:53 AM  8 years ago
Andy.Kim

rrVeteran

Seattle, WA

MyPosts All Forum Topic
Evo is a great heli. I have the SDX and I love it. I've had mine stock and the head was setup as per manual. Recently I changed the head setup and used the outer hole on the flybar carrier. This increased stability without sacrificing cyclic response.

Here in the NW the season has come to an end. My SDX is undergoing a face lift. I'm converting the SDX to Flybarless utilizing the stock head. The conversion is simple and the only thing I had to get was a swash driver. I'll be using the Skookum 720 stabilization unit.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2010 11:41 AM  8 years ago
dayotte

rrApprentice

RR SUCKS ASS

MyPosts All Forum Topic
...
SHARE  PM  EMAIL  Attn:RR  Quote
10-14-2010 04:20 PM  8 years ago
payne1967

rrElite Veteran

uk

MyPosts All Forum Topic
you either need a swash driver (eg vario 68/25) or lock the washout unit to the mast
remove the fly bar and fit the control rods direct from the swash to the blade grips

if you go for the washout method it looks better if you cut off the unused end of the washout arm

if you are converting a sceadu i used the following
vario swash driver 68/25
jr 94005 l14 control balls (x2) for the blade grips
align g3 control rods hn7100t
quick uk/ rocket city rod ends

i used the align g3 rods as the 2mm std rods kept bending

SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-14-2010 04:22 PM  8 years ago
Andy.Kim

rrVeteran

Seattle, WA

MyPosts All Forum Topic
I will create a new thread in the near future that provides all the part numbers.

It's surprisingly simple with the sdx. Feel free to pm me in the meantime.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2010 04:35 PM  8 years ago
Andy.Kim

rrVeteran

Seattle, WA

MyPosts All Forum Topic
Only thing different I did was use the left over stand offs from the 135degree swash setup. It's what Dominik did. I also bought a century swash driver. I didn't feel comfortable tap and die the plastic washout.

I did use Payne idea for rod and UK link.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 841 views POST REPLY
Home✈️Aircraft🚁HelicopterHIROBOHirobo SDX › End of Heli sabatical
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Thursday, July 18 - 9:08 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online