RunRyder RC
WATCH
 1 page 1798 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Spektrum DSM › DX8: Y harness with RPM sensor
10-11-2010 01:50 PM  8 years agoPost 1
Felt

rrApprentice

Acworth, Ga

My Posts: All  Forum  Topic

I was wondering if someone smart here could post some kind of an electrical scamatic on how to make a Y-harness to use with my AR7100's rev limiter backplate sensor and the telemetry module. This dumb person would appreciate it.

Felt

PM  EMAIL  Attn:RR  Quote
10-11-2010 02:40 PM  8 years agoPost 2
cbflys

rrVeteran

Nesconset, NY - USA

My Posts: All  Forum  Topic

https://rc.runryder.com/t611945p1/

Use the schematic shown in this thread. Just plug the lead that it shows going into the Throttle Jockey into the AR7100R instead.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2010 03:21 PM  8 years agoPost 3
Felt

rrApprentice

Acworth, Ga

My Posts: All  Forum  Topic

ok thanks

PM  EMAIL  Attn:RR  Quote
10-11-2010 03:56 PM  8 years agoPost 4
cbflys

rrVeteran

Nesconset, NY - USA

My Posts: All  Forum  Topic

Actually, in looking at it again, it is drawn for the Align sensor. When using the Spektrum backplate sensor, you don't have to swap the +/- leads.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-12-2010 01:13 AM  8 years agoPost 5
Felt

rrApprentice

Acworth, Ga

My Posts: All  Forum  Topic

Thanks..I was looking at it today and i think i'll wait for someone else to try it first.

PM  EMAIL  Attn:RR  Quote
10-12-2010 02:27 AM  8 years agoPost 6
Jet Jeff

rrNovice

USA

My Posts: All  Forum  Topic

AR 7100R back plate sensor
Just use a Y-Harness off the Sensor. Hook up to the TM 1000 using
a conector like the one that goes to the Data port on your TM1000.

BUT pull the red lead out of the JST mini conector. That goes to
the TM-1000 It will work just fine this way.

Hope this helps . I use it this way on all my Helis.

Jeff

Team JR Horizon. Jet Cat Field Rep.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-16-2010 07:18 AM  8 years agoPost 7
latesleeper

rrApprentice

OH

My Posts: All  Forum  Topic

Can someone illustrate a specific diagram of the 7100R backplate sensor, TM1000/TM1100 and the splitter? The diagram from the post above does not match the color of the leads from the backplate sensor.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-16-2010 07:44 AM  8 years agoPost 8
latesleeper

rrApprentice

OH

My Posts: All  Forum  Topic

Is this a correct diagram or do I have the leads reversed on the telemetry module side?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-16-2010 05:24 PM  8 years agoPost 9
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Splitters
These things are great for making splitters and Y-harness.

PM  EMAIL  Attn:RR  Quote
01-05-2011 06:47 AM  7 years agoPost 10
swashy

rrNovice

USA

My Posts: All  Forum  Topic

On my 600 and 700 I have a Multigov and a tm1000 and i want to share the same Crank pin Hall effect sensor has anyone done this conversion and not ended up frying the multigov and or Tm1000.....
Adding a second sensor to feed the TM1000 just add some more complexity This post schematic is what i had decided to do but i have held off until i am at least the second to try it...
Since i seems to fry Heli's electronics without trying.....
thx

PM  EMAIL  Attn:RR  Quote
01-06-2011 01:16 PM  7 years agoPost 11
jschenck

rrProfessor

La Vista, NE.

My Posts: All  Forum  Topic

Just hook up the signal wire only. No need for the + or - wires. This is what I've done with my TM1000's and is working for me

PM  EMAIL  GALLERY  Attn:RR  Quote
01-07-2011 04:54 AM  7 years agoPost 12
swashy

rrNovice

USA

My Posts: All  Forum  Topic

Thanx for the quick answer....
I modified the wiring accordingly.
regard's
swashy

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1798 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Spektrum DSM › DX8: Y harness with RPM sensor
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Monday, December 17 - 5:15 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online